Search results

I'm in the market for a reasonably priced 1911 in the $1000 range, I haven't fired many of them, I did fire a SIG STX 45 and really liked it, I shot it better than any handgun I own.. The STX is from their custom shop, the slide is tight and moves really nicely, the trigger is also very good...

I hate buying phones but they are a necessity these days.. I compare them to trading a car in, you have to know when the time is right financially.. They offered me a bunch of money for my three year old 7 plus so I ordered one. Anyone have one yet? Likes, dislikes?

I thought I would open a thread to understand the AR rifle. I have many firearms but no AR's, lots of people have them that go to the range I am a member of, I don't see the need for me to purchase one at this point. If I use a rifle for some reason I use a bolt action rifle. A few questions...

So they hand me a list of things I can buy for local children's school supply's. I go inside thinking I'll grab some pens, pads etc. I read the whole list after I get what I need and this was on the list: Shoes socks shirts pants gloves baby wipes pencils pens paper binders school snacks I...

I just purchased two older firearms that have surface rust.. I'm thinking a copper sponge and oil will remove the rust. Anyone else have a better idea? 1960's Western Auto 107A 22mag (Mossberg made), it's a nail driver. 1973 Winchester 37A 410 made in Ontario, beautiful wood and receiver scrolling.

I have to spend this winter in ME to visit family in the nursing home.. So I bought this little guy to clean snow, the bucket is only 46 inches. I'm trying to figure the best way To be able to move snow but I really don't want to alter the bucket to much because it's a good size for earth work..

120 hours, SSQA, only thing wrong with it is a broken headlight bezel. Otherwise looks new.. I like three range hydro, fuel fill location, the whole tractor in general really.. I don't like the trebble pedal but I will be removing it anyway. (installing hand controls).. $13,000 cash deal...

Sold my equipment up here, I will be moving to FL this summer, I will be helping to maintain a 26 acre horse farm, (my sisters place) across the street. All open grass land. She has a 3038 that she bush hogs and drags fields with and it has a loader. She has a diesel Kubota zero turn. My...

4-7PSI, Can be used on other tractors, OEM. I bought it thinking my pump was bad and it was a fuel line problem. I paid $212.00 for it, will sell shipped to anywhere in the states for $110.00..

What is with the navigation on these things. It takes me three to four tries or it wont do it at all to put an address into it, maybe mine needs an update or are they all junk? Anyone else not like the way it works? It could be it was designed by Microsoft that's the problem.. Also the phone...

I am trying to help a older gentleman with his 1715, It's starts perfectly cold and runs great all day long, shut it off for 10 minutes and starts hard. When I go to restart it, I notice the fuel pump makes what I would call an intermittent sound. If it's cold the pump sounds steady. I replaced...

I am going to have a ton of fence posts to cut around and this thing looks promising. Does anyone have one or have any input on them? 3-Point Hitch Trimmer Mower: String Trimmer and Fence Mower | DR Power Equipment

I destroyed my 200T today, my favorite saw. I was working with a guy in his wood yard and he ran it over with his crawler. Not much you can do. So does anyone have a 201T or a 540XP? What do you think of it, I have read some on both, seems the 201 T has a little more torque but the 540XP makes...

Lost my 27 year old nephew in 2015 to an overdose and yesterday his 34 year old brother did the same. My cousin is struggling with his 18 year old daughter as she has had narcan a few times in the last year. It's ridiculous, once that stuff gets a hold on them it's pretty much over..

I will be moving to central Florida soon near family, the area has many snakes. Lots of fields and pastures. The property bordering my property has cattle and lots of wild rabbits and Rattle snakes. My sister has horses, cows and dogs that have been bitten my snakes, some have died and some...

What is the best lubricant to use on the inside of the ignition? I have on hand. Remington dry lube for firearms. Silicone spray. WD-40. White lithium grease. Opinions??

I’m working on an old Bolens and the glow plugs aren’t getting power from the switch, it has no relay and the fuse is good, my question is, I have a 30amp momentary switch and was wondering if I could put power and ground from the battery to the switch and power the glow plugs with the switch...

So in 2008 I purchased a new John Deere 2305 TLB, I did 51 hours of work with it at my new home and decided I didn't need it anymore (which was a mistake). The guy I sold it to was an older gentleman from about 120 miles from me. He took the tractor off the trailer, put it in his heated garage...

What a circus last night..

I have done a lot of troubleshooting on this tractor. Thought I had it fixed about ten times but nope.. He hasn't used the tractor really much at all this summer, it's mainly a snow mover with the occasional small job. 226 hours 2013, it's my buddy's tractor. Symptoms are hard to start after...

I have a 2014 Massey GC1705 that I am going to sell and upgrade when I go to FL, I'm wondering what you guys/gals think it's worth, I know in different parts of the country it will vary. Private sales here in Maine seem to be about average and it's pretty easy to sell a low hour in good...

I was thinking of selling my GC before I move to FL. I had some extra time today so I wandered down to the JD, Kubota Dealer (they sell both) today, huge dealer, tractors everywhere.. I looked things over and from what I see of the new SCUT's, I will be staying with MF.. I was comparing my...

So my aunt has a Kubota BX that is hard starting when not run for a day or so, the weird thing is, when I remove the intake it starts no problem at all, Nothing rubbing on intake, it doesn't touch anything, the filter was dirty but I cleaned it with compressed air, I took the whole intake apart...

I have a neighbor 3/4 of a mile up the road, he has a 500ft gravel driveway that washes out in heavy rain, I fix it four times a year, it takes me about two hours. I bring all the material back up the driveway with my rear blade, ditch the sides and crown the top, when I'm done it looks great...

Maybe someone should bury this guy alive?? Massachusetts man buried dog alive because it didn't get along with kitten: reports | Fox News

I want to make sure I have the small line coming off the pump to the return Line on the right angle. Thanks in advance for taking the time to that, I appreciate it..

I'm still trying to pull my boot out of my you know what after talking to AGCO this afternoon. I have a 2014 GC1705 that has 224 hours on the clock, I had air getting into the fuel system, took me three weeks of an hour here and there to figure out there is something wrong with my injection...

Been watching videos and don稚 see anyone using one having very good results. Is it better to use it in reverse and with the bucket flat? I値l be removing light brush. Maybe someone that has one can give my some pointers.. Thanks in advance.

They say there is a 100,000 of those things in the Everglades, that’s crazy, they are destroying the ecosystem they say. They will never be able to eradicate them, it’s a disaster for the wildlife that is supposed to live there. People letting snakes go when they get out of hand, storms...

Does anyone sell them here, I tried a search but didn稚 see anything.

I did a search and am unable to find them, anyone know where I can get them?

My buddy bought a GC1705, he asked me to check it out because I have one, the tractor starts great when it's hot, when the engine sets for an hour in 80F temps it acts like it's not getting fuel, it starts but cranks for a while. The glow time or plugging the block heater in makes no difference...

Does anyone know the part number for my glow plugs, all three of them test bad. I was wondering if the plugs for the GC2300 series are the same. Thanks in advance.

Just converted my chute rotation from manual to a 100rpm 12V Makermotor. Turns plenty fast enough, I'm going to leave the chute top alone and try it without installing a linear actuator, I don't see in my application that it is needed. Cost me about $80 for the motor, hardware, wire and DPDT...

I bought a new Blizzard B54 3ph blower for my 1705, I have a clear Berco soft cab, the only way I can think of is with a soldering iron.. Any ideas? I like to keep things as manual as possible so I want to keep the manual chute.

Seems to be pretty well made, I'm tired of trying to line up draft arms several times a day when working on a project.

On the left side of the frame in the suction screen area? I took it out by mistake and thought, ut oh, I put it back in the way it came out quickly.

I have decided to buy a 3pth blower for my 18.9pto hp tractor, I have a fenced back yard that my dog uses and when the snow gets really deep I run out of room to bucket it over the fence so a blower in the answer. The meteor is 366lbs The Blizzard is 512lbs The blizzard is more rugged but do I...

Last night I was moving yet another foot of snow and I went over the edge of a ditch and the front axle was in deep and got stuck, it took me 15 minutes to get out with the use of my loader. Tonight I was moving yet another foot of snow and noticed the tractor didn't seem to have the power it...

Just a heads up to anyone owning a GC tractor with a loader. Every once in a while my bolts (I think there are 7 of them or 8) that bolt the loader to the frame back out. I took them all out one at a time and reinstalled them with lock washers, they stay put now. You might want to look at yours..

Went on like a snap, SSQA is a "Worksaver" pretty well made piece. I'm very happy with the bucket, a bolt on cutting edge is on the way. I installed the SSQA because I bought a set of Titan forks a new bucket and I'm going to buy a grapple from Travis when he gets one.

I haven't used it but twice and I don't see the need the keep it. I had it made for my 48 inch bucket, should fit any bucket that comes on the GC tractors, if someone wants it before spring I can dig the snow out from the doors of a building that it's stored in. Don't know why I can't post in...

I just purchased an adapter to convert my pin on to quick attach, I would think 1/4 plate for the plate on my bucket would be enough but I don't know..

I'm looking for a skid steer adapter for my DL 95 loader and they make one and ship it for $610.00, has anyone bought from them or know of a better unit? I am looking for the mount and two plates because I have two pin on buckets.

I installed all LED lighting, a wireless backup camera with an 8 inch screen, 2 Abrams class 1 LED strobes, and a Bercomac cab.. I added chains to the front this year for better steering, works great.. This is the first year I use a back blade for snow removal and I like the combination of the...

If someone has one to sell or knows of a good dealer to buy one from please let me know. Thanks in advance..

It has to be hydro, I need to be able to ted/rake hay and do loader work on my brothers farm, I think I can find something used but I need to know what to look for.. The only tractor I don't like is NH, had one and don't care for them..

My battery is showing signs of needing replacement, it's charging fine but it turns over a little slow when it's cold, I want to nip it at the bud before it doesn't start in the middle of a blizzard..

Does anyone know anything about this blower? It looks to be in good shape, "48" inch, the guy says it works perfectly he wants $800 for it, sounds cheap to me..

I finally got to spend some time with my new tooth bar.. I moved a couple of tons of crushed stone, took down a bunch of 25 foot pine trees and dug out a bunch of brush, and dug out a gravel driveway, it works really well..

If so, were did you buy the parts and how hard was it to install.. Also is what I'm looking for called a "power beyond kit"?

This is the first time using my three point hitch with my new back blade, when I lower my blade to the ground the hitch doesn't go up and down with the contour of the ground. It's kind of a pain to keep pushing the down lever down when the front of the tractor goes down and the blade moves up..

I Love my DL95 on my GC1705 but I don't like that there is no bucket leveler, I find myself leaning over to one side to see under the bucket. Does anyone have any idea's on making one? It's kinda foolish to build a loader and sell it without one IMO.

I'm going to be cutting a small lawn, not even half a acre..The dealer I bought the tractor from sold this mower last year and the guy used it once, he paid $2300 for it, he traded it for a zero turn, they offered it to me for $900 so I took it, can't wait until Monday when tractor and mower get...

Anyone use one of these? The dealer I just bought my 1705 from took one in on trade for a zero turn yesterday that is like new, he said he sells them for $2300 new and if I wanted it he would hook it to my tractor before it leaves and put it through the shop to make sure all is well for $900...

My buddy has a Berco on his 2305 and it's an okay cab but I was wondering what other options I have. I just want to get out of the wind and maybe put a little heater in there also. I am also in the market for a 3pt hitch snow blower, any recommendations are appreciated.. I want to do it right...

New here to the forum from Maine. I just purchased a new Massey 1705 with a DL95 FEL. Should be here on the 20th from VT. I have 5 acres, I'm looking into a cab for it, I'm planning on getting a bunch of small projects done this summer and moving snow and firewood in the winter. I'll post pics...