Search results

My CK35HST with 80hr's on has to have a complete new Hydrostatic unit installed. Last fall I posted that at slow speeds the tractor would pulsate in forward or reverse, regardless of RMP. This spring is got to be so bad I called the dealer again to have it looked at again. Dealer says they...

I ran my HLA plow all winter, over 70hr's of plowing. Didn't use, didn't need the bucket at all. Very well build and does the job.

A pull type Blower would be a waste for me, I regularly get 4' - 6' drifts all the time. A pull type Blower would be useless. Even a regular Blower needs help with big drifts.

I have a 64" Blizzard by RAD Canada. I'm very please with it so far (About 40hr's of snow blowing). I unit is heavy, well build, and can really fire snow. I would definitely recommend Blizzard.

My CK35 has less than 50 hr's on it, and so far all has been good. Today at 4 deg. F the Temp gauge would not move off of stone cold. Even the Cab heat seemed less than normal. Tractor was plugged in all night, 1200RMP warm up for about 8 minutes, then up to Snow Blower speed about 2300RPM...

I've found the plow to be far better than the bucket for snow moving. I have rear remotes and lines running forward for hydraulic angle. I'm not sure about a snow Pusher, I've never used one. I got the plow mostly for clean ups and light snow falls. What I have found is that the plow is far...

I know some on here have had issues and or concerns about LED lights icing up when Snow Blowing. I have 4 sets of LED's on my CK and didn't have an icing problem with any of them, not one. Last night in the Blizzard was a great test, It was cold, it was still snowing and the snow was being...

Hey Glade, I think you'll be fine with either the 84 or the 78 inch bucket. I'm thinking a load would have to be very heavy and completely on one side to bend the loader frame. Even then I'm not sure it would?? I'm not an engineer, that's just my gut feel from 30 + years of running small...

A friend of mine received his new 3039R less than a month ago. His brand new tractor died right on the spot as the dealer unloaded it. 2nd brand new 3039R delivered a few days later. It too died the other day with only a few hours on it. He's now waiting for delivery of his 3rd brand new...

Hi Guys, a couple of my neighbors would like me to snow blow their yards - driveways on a regular basis. I'm considering it but i have no idea what a fair price is?? do you price by the job? by the hour? Any help would be great. Thanks

I used a suction cup mount fan and installed the Cig plug behind the seat on the tool box. Power comes from acces. wire located by the right fender ROP's. Works like a charm.

This is my first year plowing with the CK35, but I'm very pleased so far. The first snow was about 10 - 12 inch of heavy wet snow. 2nd plow was about 4 inch of wet slush, again no problems. The CK never spun a wheel, never missed a beat, didn't move sideways at ALL. With that said, every...

K Man, on my computer once I select the image from my computer, I click "open", then the small window from TBN opens again and I Click Upload File. Done. Maybe your image size is too large. this Pic is 3.13 meg in size. and loaded OK. Sorry i can't be of more help.

I have a Plow on my CK35 as well, with a rear mount blower it's a great combination for snow removal. Post a picture Chuck, let's see what your beast looks like all dressed up!!

Finally, I have everything all set for Winter!!

I have a new Kioti CK35 with Hydrostatic Trans. Tractor has about 6hrs on it and the transmission has started to pulsate at very low speed at any RMP level, or any range. Mowing, driving it works fine, but if you only want to move very slowly forwards or back the transmission pulsates in a...

I've been looking for LED lights to replace the factory lights on my CH35 with factory cab. The 4 inch square or round LED's I've looked at seem a bit on the heavy side, compared to Halogen lights?? The Factory Cab light mount is only thin fiberglass, I'm afraid over time the vibration and a...

I've been looking for LED lights to replace the factory lights on my CH35H with factory cab. The 4 inch LED's I've looked at seem a bit on the heavy side compared to Halogen lights?? The Factory Cab is only thin fiberglass, I'm afraid over time the vibration and a heavy light will crack and...

I Learned a Valuable lesson last night. It's that time of year up North so I decided to unhook my rear finish mower for the season. I took it up the hill to a storage garage and put it away. Now my little tractor has no weight on the back and an empty bucket up front. Not thinking anything...

I just ordered a new CK35HST FEL with a front mount plow and rear mount snow blower. 1 remote runs the plow angle. 2nd remote runs the blower chute turn. 3rd remote is the problem, my dealer tells me this tractor can only have 2 remotes. I want a third remote to operate the blower chute tilt...

Final got our first snow of the season last night and I was keen to try the new tractor in the snow. Both the blower and bucket work great, my problem is my hands nearly froze to death on the steering wheel after only half an hour. Any advice on what to put on the steering wheel? Is there such...

Hi Guys, Winter is on the way and I think I need a Cab. **** near froze to death out working last weekend. Who makes Cabs for Kioti tractors?? Thanks for the help.

Can anyone explain to me why a relay switch is needed or used when hooking up more then a couple of work lights? I guess I’m not sure what a relay switch does?? I have two lights on the rear of my CK20 wired without a relay, and would like too add two on the front as well. Thanks for the help.

Hi Guys, I have a new 60in rear finish mower that I'm having troble with. Some of my property is rolling terrain and other parts are gentle V shape drainage areas. My problem is how to keep the mower from scalping the rolling areas, and digging in to the V areas. Obviously I can lift the...