Search results

Can a bt603 backhoe be added to a bx23S, do they even sell a bx23s without a backhoe

I've had my xg3140h for 1.5yrs now, great tractor just hit 100hrs, no problems so far,,, I do feel the lifting capacity is a bit weak,, I'm going to check it off one of my rear remotes, I have a gauge, just gotta buy the hydraulic hitting and I assume I just dead head it into the gauge off from...

Can i buy rim guard anywhere and install myself or can only rim guard dealers install it, i live in upstate NY where it gets fairly cold and want to add some ballast to new tractor rear tires

Hey guys i have an opportunity to buy a bh77 backhoe attachment from 2011, i know i will have to buy the subframe kit for the tractor side but will a bh77 from 2011 work fine with a subframe kit for a 2017 L3901,, does any know if they have changed much over that amount of time, also will the...

Hey guys is there any place where i can get a list of which tractors a kubota bh92 backhoe will fit on, thanks

Hey guys, my dad just had his driveway topped with this, i dont know what they even call it, theres alot of sand/dirt with rocks, mostly rounds ranging from sizes 1/2"-3",,, it was very reasonably priced for a tri axle load, i am thinking about topping my 600' driveway with it, but i want...

Hey guys, i currently have a 2007 ram 2500 w/ hemi,plow,60k miles, i like the truck but i tow my tractor alot, with trailer and tractor i'm probably around 6700lbs-7000lbs,, i'm really not happy with the towing power, its fine on flats but the roads im ususlly on are quite hilly, and alot of...

Hey guys, i know lots of people use front blades for snow removal, i'm considering buying one for my Ls xg3140, anyone ever have issues with springing or getting their loaders tweaked, my driveway is river run stone/dirt so its by no means smooth and is humped in middle where vehicles don't...

Im looking for a site that i can go to and look up a part for my xg3140 so when i get to the dealer i can have a better idea of what i need to explain/show or even a place to order them online would be great, i did like that for my previous mahindra they had a parts app with prices, it was nice

Im looking for a site that i can go to and look up a part for my xg3140 so when i get to the dealer i can have a better idea of what i need to explain/show or even a place to order them online would be great, i did like that for my previous mahindra they had a parts app with prices, it was nice

Looking for bumper pull 7 x 14 14k dump trailer anywhere on east coast, what do you guys reccommend and rough idea of price be great, thanks

Hello I'm looking for a short hydraulic top link, the one i currently have is cat. 1, 2" bore, 8" stroke,,, retracted it is 20" extended it is 28",,,, i've seen a couple that are 18" retracted but dont think will find much shorter than that and have 8" stroke, maybe i don't need 8" stroke but...

I have the harbor freight quick hitch, i extended the hook out but i was curious do you guys use the quick hitch with every attachment that you can hook up to it, i was curious if any issues if i were to use it with my box blade, i dont see wjy their would be, i juat got new tractor with a hyd...

Does anyone have a hydraulic side link on a workmaster series new holland, they have a slightly different mounting system for there 3 pt arm supports, with the dual knuckle on top and seems like a standard one won't fit,, thanks

Hello. I'm getting my new Ls xg3140h tomorrow, ive read that its better to run at higher rpms to prolong time between regens, what do you guys typically run them at for just normal operation, loader work,box blade work and backhoe,, i'm used to running my other tractors around 1800 -2000 rpms...

New tractor (XG3140H TLB) being delivered tuesday, any recommendations on some things to do to it before using/abusing, just looking for ideas as to do upon delivery, obviously look it all over good, check bolts and make sure everything is tight, i may even throw a coat of wax on it to help keep...

Anyone know what type of fittings are on a set of dual rear remotes, tractor is on order and i am trying to order fittings for top and tilt kit but forgot to ask dealer what type of fittings the factory uses, the kit is going on a xg3140, thanks

Best place to buy hydraulic top link & side link, and whats best way to determine what length will need, going on 40hp LS xg3140,, thanks

Hello I'm looking at purchasing a 72" tiller and a 72" brush hog/rotary cutter, anyone have any experience with LMC implements, prices seem reasonable, thanks

My tractors engine is quite dusty/dirty,, i can blow a good amount of it off with air, but i'd like to keep it cleaner, what are peoples thoughts on washing or pressure washing the engine

I have a 2538 with 160hrs, i was using it the other day in low range backing up a hill to rake down it when I hear air an puffing sound, i popped hood and i see air/hear "puffing" from what i believe is where fuel injector goes into top if cylinder and i think its the glow plug there also, i...

Does the dual rear remotes from factory have a float for either one, i plan on getting rear remotes but i really want atleast 1 float valve, and i also would like the clean look of the factory remotes & levers, but i may have to build my own maybe, but i doubt i can build a 2 spool set up for...

I'm thinking about selling my tractor and possibly upgrading, just curious as to possible selling price don't see many tractors with a cab and a backhoe out there on tractor house or anywhere to compare to, I called dealership to see what it would cost now brand new $40,000 if financed $35,000...

I cross posted this in the mahindra forum also, since its a hydraulic issue i figired post it here also,,, I just got a used backhoe attachment and have only used it 1 time, but i noticed that when parked and on tractor that backhoe stabalizer legs would slowly drop, then when I removed it from...

I just got a used backhoe and have only used it couple 1 time, but i noticed it when parked and on tractor that backhoe stabalizer legs would slowly drop, then when I removed it from tractor I'm pretty sure they lost pressure because backhoe is now setting on frame and not legs, I could...

Any one have any idea how mahindra attaches there roofs onto the cabs, it looks like the previous owner caught the roof on a branch or something I'm assuming, I don't see any fasteners to try and reattach it, almost like it is glued or formed togethor, It will push back togethor but just keeps...

Hey guys, I'm thinking about selling my 20' car trailer and getting a dump trailer, I just think I would use it more for moving dirt/mulch/construction debris and hopefully still be able to move tractor, just looking for people's opinions on size and experience, a 6x12 10k is the size I would...

I currently have a kodiak 60" tiller, it's been fine but i am looking to upgrade to a 72" now that I have gotten a bigger tractor 38hp, looking for options on a moderately priced tiller that is 72", I don't have alot of options around me, besides tractor supply and one dealership that sells...

I remember seeing this covered somewhere, when back dragging it will roll up a couple inches and then hold position, or if tractor is off and bucket is sitting on ground and curled up I can step on front edge and it will curl down and the cylinder will extend 2 inches, is this a cylinder issue...

I have a backhoe on my tractor and assuming theres no real way to drain fluid out of backhoe cylinders, I'm coming up on 150hr service and was just thinking you pretty much just let it mix in with the new I'm assuming

I just picked up a 2538 cabbed tractor it has a backhoe, the 3 point arm stabalizers were missing and it looks like the lower hooks of the subframe are in the way of having them on, I made a set out of 3/8 chain for now, but I assume they must fit, I'm just curious why they are missing

Hey guys I'm thinking of afding a 8k-12k winch to my 20' trailer, just looking for advice, 1) i'd like to find a winch with wireless remote that won't break the bank 2) would bolting it through the deck boards be sufficient, probavly easiest I do have the 6" vertical L channel frame in the...

Does anyone know where I can buy the 3 point arm stabilizers that just use the pin and has all the holes, I'd like to swap out the turn buckle style on my mahindra 2538 to those

Hello has anyone ever heard of the brand maschio, maybe it's just me but i'm not familiar with them, I bought a couple implements used and one of them was a 72" maschio finish mower in great shape

Hey guys, I was looking at buying a 2538 cabbed tractor at a great price but when I test drove it, it had no low range, worked fine in high/med, but then when shifted to low there wasn't any resistance or click feeling and the tractor just acted as if it was in neutral, just trying to...

I'm looking for recommendations on where to buy a 66" skid steer attachment style tractor bucket, I see titan sells them but I also see alot of "skid steer" buckets, I wonder if they are much different, possibly different angle when mounted??

Anyone have an idea of the weight of a 2016 mahindra 2538 with loader and cab model, thanks

Hello all, I'm interested in a used bh77 backhoe on Craigslist, the owner says it's from a 2011 kubota, my question is with the proper subframe will it fit and work on a 2017 L series, is it the same as a brand new bh77, thanks

Hello all, I'm interested in general idea of a price on L2501 hst, with quick attach bucket, I'm willing to travel, I'm in upstate NY,, thanks

Hello all I'm looking to buy a xg3140h, and plan on adding 2 rear remotes from the factory, seems like a good price to have them do it then, does anyone know if the factory remotes have a float for either one, thanks

I'm looking at adding rear remotes to my new tractor 13gpm total (8 hydraulics 5 steering), what's a good 2 spool valve with atleast 1 float valve, my main uses will be for top and tilt cylinders, also is there any advantage to using a joystick valve, they seem like they would be more compact...

Hey guys I'm looking to purchase a xg3135 with backhoe, but i'm considering jumping up to the xg3140, is the extra $$ worth it I believe the weight of tractor is the same but higher pto hp- 32hp vs 28hp, and lift capacity 2100lb vs 1700lb,,, I'm leaning towards the 3140, will this tractor be...

3 point arms bouncing while at idle, I had 6' brush hog on this am, all morning fine, driving back and hit sone rough terrain, and now 3 point arms/implement bounce while idling or just moving

Hey guys just looking to get your thoughts on this tractor thinking about purchasing one, i originally had an xj2025 with backhoe but I want a bigger frame tractor anyone had good luck with this model or issues I should look out for, thanks

Looking for just some ball park numbers for a new L3901HST, 4x4 with quick attach bucket, and industrial tires, pretty standard, just curious haven't reached out to any dealers, I'm in upstate NY, thanks

Hey guys I bought my 2538 used and now am getting ready to change the hydraulic oil at 100hrs, I'm going to us the travelers premium from TSC, but my manual is alittle confusing, it says transmission case holds 8.5gallons, front axle which i plan to use the same hyd. Oil,, because I live in...

What are some good subframe backhoe options, I own a mahindra 2538 and will be purchasing a backhoe attachment in the near future, I'd like to explore my options to other brands besides mahindra to see if they would be any cheaper, it's a 38hp tractor, and the backhoe definetly needs to be a...

Has anyone had any luck painting their trailer deck (equipment trailer) not really necessary but thought it would look nice and help to protect longer, thought about using a deck paint something with a little bit of texture, not sure how well it would hold up, although I really don't haul my...

Hey guys can anyone tell me what difference there is between a backhoe for a cabbed tractor versus an open station, my 2538 is open station and takes a 2538B backhoe attachment, I found a nice used 2538cb backhoe attachment that goes to a 2538 but with the cab, I've been trying to research...

Just wondering if anyone has ever sold a tractor on ebay, it looks like it would need to be listed under heavy equipment which would put the selling fee at 4%,, which on say a $18000 tractor would be about $720,, I believe there's also a listing fee ($20),, from what I understand if you were to...

Anyone have any luck mounting bolt on hooks on top edge of their bucket, the flat only looks to be just over 2", I guess weld on would fit alittle better and not hang off as much,

Hey guys I'm going to do a on oil change on my 2538, what does everyone recommend for oil filters and oil I like to switch over to a full synthetic oil, that should be fine corect, also they don't know how much oil it will use and any filters part numbers, thanks

Hey guys I'm looking to add some auxiliary hydraulics to my tractor, it's a 2016 mahindra 2538 currently has the loader and obviously 3 pt hitch, my plan is to break the PB connection on loader valve and run it into a D03 subplate(3rd function valve) out of the T port to rear remote valve (2 or...

Hey guys sorry for millionth post on this subject, but im looking to add 2 rear remotes for sure and possibly a 3rd function, I have a couple/bunch of questions, I know I need to use PB from loader but is there a 3rd function valve manifold (D03 subplate/manifold) that also has PB capabilities...

Hey guys I have an opportunity to buy a 2538 B backhoe for my mshindra 2538 but the owner of the backhoe attachment sold the subframe with the original tractor and now i'm trying to see if I can get a subframe kit from the dealership right now there looking into it, and are not sure if I can buy...

Hey guys I'm getting ready to add a bunch of hydraulic remotes to my tractor and i was curious if there are special couplings that are needed to mount the rear remote connections into a plate, unless i just need to find couplers with male threads and lock them down with nuts into a plate I make...

Anyone know what a 2016 mahindra 2538 with loader weights,(non loaded tires) looking to move it long distance and trying to figure out the weight, I'm hoping a 20' 7000gvw dovetail trailer will be fine and also have no issue pulling it with a 2017 silverado 5.3, thanks for the help

Hey guys I bought a xj2025h last year which was fine for my needs but now I have an opportunity to start/work a flower farm, so I'm going to try and get a bigger tractor for better ground engaging work, what should be a reasonable price to try and sell my XJ2025H TLB with 66hrs, and filled...

Is there anywhere along the east coast states where i could purchase a "New" 16-18' equipment trailer with dual axles and brakes to haul around my 4000lb. tractor,, my budget would be around $2000 So I'm not sure if it would be possible, thanks

Looking to repaint my backhoe feet and was wondering who has had luck with a good "LS blue" matching paint, thanks

I'm thinking about purchasing a used 2 yr old L3301 from an individual and I read somewhere once that you could finance a backhoe at a dealer using the kubota finance, I am wondering if their is any truth to this, doesn't seem like they would let you, thanks

Hey guys just looking for a rough idea what to expect to get for quotes for a L2501 hydro with loader and backhoe, I'm in upstate NY but am willing to travel especially to save on taxes, also do dealerships offer the 20% down-84 month financing on used tractors that are a year or 2 old, thanks...

Hello just wondering if anyone has ever had good luck having a tractor shipped/delivered, and if so rough estimate of what it cost, I'm looking for a particular used tractor I see a lot of them further way than I want to drive to pick it up, so i was just curious, thanks

I currently own a xj2025h and am thinking i need a larger framed tractor, I like the xg3025 but was curious if it is the same engine as in my xj202h,, I've noticed before with my tractor going up a hill (long but not terribly steep) it lags down quite a bit even in low range, I did have backhoe...

Has anyone bumped up there pressure relief valve yet to get alittle more lift capability, I'm thinking of doing it to mine but would like to get a gauge on it first to see where I'm at and not to increase it to much,

Does anyone know if a mahindra 2538B backhoe would fit any other model besides the 2538, that would be close in HP, maybe a 40 hp, or 36hp, seems like they all have their own backhoes

I saw one thread on it but not really any pictures, anyone able to make a backhoe dolly for the xj2025, i tried buying some heavy duty snowmobile dollies, but didnt have much luck getting them to work, may have to revisit it, but might just be better off building something, kinda hoping for...

Any XJ owners out there tried pulling a single bottom plow with there machine, i'm curious as to how well it would do, my soil is pretty rocky and definetly has clay, thanks

Hey guys, anyone know if a new holland mid mount mower (914A) would fit on my 2017 xj2025, I found a cheap new one on clist, and was wondering if it may fit since its same tractor pretty much as boomer 24, I believe the deck is for an older new holland tractor since the new boomer 24's don't...

Hey guys i own a 2017 xj2025(25 hp), and was curios as to engine rpm and pto speed i should run a couple attachments at, 1)60" tiller, i'm assumibg slow speed and low rpm, for maximum digging 2) 60" brush hog 3) post hole digger, once again low and slow Thanks

I currently have backhoe on, haven't removed it at all yet, but plan to soon. I assume its not possible to have backhoe on and 3pt arms at same time?

Hey guys wondering if it's worth adding rear remotes on a small compact tractor, I have a 25hp LS xj2025, no a lot of room back there plus I have backhoe on at times, I wish I would be able to add the remotes and be able to add a tnt kit for a box blade but I'm just not sure it's worth the $$...

Looking to buy a 5' box blade for my XJ2025, I haven't checked the dealer but do have a Tractor Supply close to me any decent places online that aren't a killer with shipping, thanks

Hey guys sold my b2320 and bought a new xj2025, only had it off once so far but any tips to making backhoe mounting and removal easier and quicker or just one of those things more you do easier it gets, at some point I think I'm going to build a dolly which should help maneuver it in place,, thanks

Anybody know where or if there even is a serial number badge anywhere on the xj2025, I found the serial number for the backhoe and can't locate for tractor or loader, I know the kubota I owned briefly before this all had there own serial numbers, thanks

Hey guy I just picked up a 2015 B2320 TLB, and was wondering what are some popular attachments for it and if adding the quick attach loader (skid steer style) is worth it and how much it adds in weight really,,, also I really would like a box blade/scraper, and am wondering what size probably in...

Hey guys, I've been tractor searching for quite sometime now and I found a 2015 b2320, hydro,4x4,122 hrs with backhoe, r4 tires,, and is in very good shape,,, the owner is asking $17500,, does that seem like a fair price, and any idea what and how long is left on warranty, were they 5 years then...

Hey guys been tractor hunting last couple of months, I found a 2012 max 28xl, 122 hrs, hydrostatic, with loader, the owner is asking $9900, which I think is a good price, I really want a backhoe attachment also, I called some dealerships and they are from $6000-$7000, and apparently the same...

Hey guys I priced out the bx25 with TLB from dealer but I'm just curious what guys are getting quoted for the next size up framed wise-kubota would be with a backhoe, assuming it would be a B series,,, I liked the price of the BX with the financing but I just feel I may need a slightly larger...

Looking for a kubota bh65 subframe backhoe to fit a b2320, around new York state,, thanks

Hey guys i'm going to look at a ls j2030h tomorrow, haven't heard much about them anyone out there own one or have experience? I did read about the oil leak from back of tractor, and the other thing I'm not thrilled about is i believe it has the single pedal for forward and reverse?

I'm in the the market for a small tractor comparable in size to a kubota bx,,, I believe the LS model would be a j2025 correct? I'm looking for prices paid on the tractor with a loader and backhoe, so I can know what's a fair price when I visit the dealer,, thanks in advance