Search results

Hello all, I had some guys putting up a shop on my property. They used my tractor for a few things. Afterwards I noticed one of the fittings on the WR Long 3rd function was dripping hydraulic oil. The fitting is loose and I am now low on hydraulic fluid. Could have been unrelated as the remote...

Hi Guys, As the title says, I had a seal go bad on the loader lift. Probably from back dragging the bucket. Anyways, lost a fair amount of hydro fluid. Took off cylinder and dropped it off at the shop today. Can you tell me what I need to do once I get it back from the shop and re installed...

Looking for one of these but don't know what it's called. Thanks,

Repainting my bucket with Kubota OEM primer. I am not impressed with the coverage of the primer at all. Can says do not try to cover in one coat. Yeah, would be lucky to cover in 4-5 coats it goes on so thin. Seems like it is more accelerant than paint. The can also does not say when it is okay...

Got my tractor stuck (again). Had to leave it yesterday but went back this morning and it initially started. I moved the HST lever to neutral to try to pull it out of the mud. Couldn't get the tractor to start again. I checked the battery with a DVM and it charged. Maybe too high as it was 16...

The SSQA bucket on my Kubota wont stay on when I put any back pressure on the bucket. The bucket doesn't appear to be bent or damaged. The loader arms don't look damaged. I'm thinking that the metal slot the locking rod goes into is bent some OR the locking rod is sliding up under pressure and...

Lost the top hook on my quick hitch. I am ordering a new one and would like to use some type of hitch pin rather than bolts. Can you tell me what size pins I need for a Cat 1 application?

Interesting story in the WSJ about farmers who have wireless service and Netflix in the cab of their large AG tractor. Who knew? Farmers Plow Through Netflix While Plowing Fields - WSJ

A friend of mine recently purchased a Mahindra Emax. He has only used it a handful of times and has run into a couple issues. The most recent issue was a blown 40 amp fuse. He replaced the fuse and it blew again right away. The shop picked it up for him. He says they told him they cannot...

Found these battery clamps on Amazon while looking for a replacement clamp for a generator. The quality seems very good and the price was very reasonable ($7.50 for a set). Purchased a couple extra for the Zero Turn and will be adding them on the tractor too. Makes removing the battery for...

I hate to ask questions on TBN if the information is readily available. I just can't find what I am looking for so here goes. I need round fence posts in 8' lengths. The diameter is 5-7". I have called a couple of lumber yards and they either don't carry them at all or have to special order...

I have been looking for pallett forks but just couldn't pull the trigger at $500 + and I didn't like the ones that attach to the bucket. Came across these tonight and they are on sale. Thought I would share with TBN folks. Seems like a great price to me...

Looking to fence the area shown below. The main purpose of the fence is to keep vehicles/people off the property and for aesthetics. It is not to keep animals in. Leaning toward a 3 rail wood fence using 4x4 posts and PT wood. I have a handheld auger, am willing to purchase a 3pt PHD if...

Anyone know what the original battery size is/was for the L4430. Someone put a replacement battery in my tractor and it is too short. The battery keeper bar is too tall. No way for it to hold the battery down as the hardware for the keeper bar is only threaded at the top. Can't screw it down...

I have a property with a 1,300 square foot home on it. Home was built in the late 50's and has asbestos siding. I would like to remove the siding, replace the windows and install hardi plank. Our area allows the homeowner to remove the asbestos and the local dump will accept it. Wondering if...

Looking for help. Can't find air pressure for the following tires. They are R4. Don't know the age. The ride is really rough so I think it may be tire pressure. If weight of tractor makes any difference it is on a Kubota L4330HTC 3,860 lbs. Front tires - Akuret 10-16.5NHS Rear tires -Titan -...

I have been really happy with the purchase of my L4330 with one small exception. The cloth seat in it smells like a dumpster or a rugby locker room. The cab cleaned up well but I just can't get the old dirty sweat out of the seat. It's so bad that my clothes stink after using the tractor...

Need to cut around a pond and can't get too close with the tractor because I don't want to slid into the water on one part of the pond and on the other side it is too wet to get close to the waters edge. So I need a offset cutter of some type. What is a good, cheap, option? I was actually...

I have left the parking brake on a couple of times while running my tractor. The indicator light does not light up when I depress the brakes. I don't have a WSM for the tractor so I don't know if the bulb is out or there is an adjustment on the pedal itself. The tractor still operates with the...

I'm using a 72" Landpride RCR1872 for cutting and for ballast when using the FEL. I have a hydraulic top link. Question is, do you keep the weight on the cutter wheel when using for ballast or do you lift it and let it hang from the 3pt? I have tried it both ways and prefer to leave the wheel...

Found this ad on CL. I don't know much about the Gray market Kubota's . Thought I would share on TBN. No idea if the ad is legit or not. condition: excellent make / manufacturer: Kubota model name / number: L3502 40 hp, front loader, 4-wheel drive, shuttle-shift trans. Bought 3 yrs. ago...

It may be a losing battle but I want to fight it anyway. How do I get rid of all these fire ant mounds? Is there an attachment that I can use on the 3pt to spread ant poison? Do they sell it in bulk at the Co/op? Do you even worry about it?

Looking for a 6' rotary cutter to maintain a field. I think medium duty will do the trick as I'm not cutting trails or clearing heavily wooded areas. Tractor supply has the County Line brand at almost half the price of the Land Pride and Everything Attachments brands. I would love to save some...

Purchased a used 2006 L4330 last week. Was cleaning it this morning and found the ashtray. :laughing: Reminds me of when airplanes used to have ashtrays in the arm rest. Do the new models have a cigarette lighter and ashtray?

Found a used L4330HSTC. It is a 2006 model with 1,300 hours on it. The used Kubota with cab is less, but not too much less, than a new Mahindra 2538/2638. It makes me a little worried to consider a 12 year old machine that has no warranty but I am open to considering it. Any...

I have been looking for a tractor for several months. Funny how when you aren't in the market for something you don't see it. This past weekend I noticed commercials on television for Kubota, Mahindra, Deere and Kioti. Turns out we have a Kioti dealer in within 25 miles (had no idea). Prior to...

Looks like Mahindra will give you an Genze electric bike with the purchase of a Tractor or UTV. Website says the retail value of the bike is $1,719 Thought I would share this information for those of you on the fence thinking "Sure wish my tractor had a bike with it". :)

I have seen a couple used 1526 with MMM online but wondered if the 1533 accepted a MMM so I checked on the Mahindra site. The MMM was not an option on the 1533 so I figured the 1526 was the only model in the 1500 series with this option. Then I tried to build the 1526 online and you can choose...

Stopped by to look at the Mahindra 1526 today in order to compare it to the Kubota L2501. While at the dealership I also tested the 2538. Seems like a good upgrade in HP, weight and bucket size for just a few thousand dollars. Might just be in my head but it seemed to ride better too. So I...

Hi guys, first post on TBN so if I missed a thread that already covers this my apologies. Have 15 acres. 10 of it is cleared and mostly level. I want to keep it that way. Kubota dealer recommended a L2501HST as I told him I want to cut and maintain the property and speed of completion is...