Search results

Thanks for the reply, this is a very unconventional use of a carb, it was installed on a FM Z 2 HP engine to replace the mixing valve usually installed on it. The whole engine sat under seawater during Ian, currently being restored, only this carb needs replaced now, hopefully with an...

Good morning, anyone know what the difference is between these 2 carbs? Aside from the air intake.

Hi All, has anyone ever rebuilt an Energy 10240 rotary spool hydraulic valve? Thanks

Hi All, looking for any information on this Pioneer 450 vintage saw. Thanks Geo🇺🇸

Hi Randy, thanks for explanation, I kind of thought that but was trying to verify. My next question is that it appears that our current model is no longer in production, the replacement is 305447 0610 G1, it has an electronic ignition that appears to attached to the side of the engine, we have...

Hi, where can I find the parts breakdown for this engine, do you know how to interpret the last 4 digits and G1 of that model # Thank

Hi All, looking for any info on the ignition system, need to rebuild it completely, only numbers that I have are Mdl# 3054473079-G1 S/N 1803141100283 Thanks

Hi, dose anyone know what this tube is for on this 808883 23 R card , fuel seems to be leaking out. new fuel pump but carburetor seems to run out of fuel, tank is 1/2 full

Hi All, is there a good video to show how to replace the starter cord on an EZ start Stihl FS45 weed eater, to prevent the spring from unwinding?

Hi, anyone know what Dia the starter rope is? P/S runs like new, starts with 3 pulls.

Hi, I am pretty sure I have , I order a used starter housing on E b, waiting for it to arrive, it should match the end that is on the motor, Ill let you know the outcome. Thanks for asking. Geo🇺🇸

Hi Richard, Thanks for taking the time to figure this out, I now know exactly what I need to go either way. I did something I never do and threw out the original housing and guts, now I am paying for it, could have no doubt rebuilt that unit with new spring etc. Seems difficult to get any kind...

So you are saying the one I have listed as EZ start is the correct starter.

Yes , the black piece is mounted on the motor.

It is a FS46C Geo🇺🇸

Hi, it should be FS46C , here is a pic.

Hi, here’s what I know : Sthil mdl # FS46 C E2S , S/N 263985156, was running fine until the string broke at which time it was disassembled, and parts were lost, I have tried to install an OEM aftermarket starter, see pic’s, when installed and plug removed it pulls fine , when the plug is...

It was taken apart by someone else, I have since ordered an OEM pawl , hoping it’s better quality. Thank for the reply

Hi All, having problems with the recoil starter pawl, it’s an aftermarket assembly with a white pawl, when I install the stater it pulls and turns over fine with the spark plug removed, when I reinstall the plug it snaps the white pin on the pawl. Any Thought as to what I may be doing wrong. Geo🇺🇸

Hi, does anyone know the resistance value of this shunt? P/N 19468 Thanks

update, problem hopefully solved, discovered yesterday that the engine RPMS were low and not producing the rated output voltage, increased RPMS, removed the add on alternator and things seem to be fine now.

Hi All , ended up replacing the alternator, my concern is paralleling this add on Delco Remy 1 wire alternator with the onboard B&S regulator/rectifier charging system. Geo 🇺🇸

Hi Guys, just a update on this problem, engine run on was due to the fact the ground connection to the coils was broken off , repaired and all is well, anti backfire solenoid is working, as stated previously this engine is running a hydraulic pump that drives a small locomotive, the alternator...

Hi All, we have an issue with parasitic currents that is killing the battery, after doing a lot of TS the only way to get the load back to 0 was to remove the positive lead on the alternator, we replaced the regulator/ rectifier with one from another engine, same results, battery is new, current...