Search results

After my bil blew the motor in my tractor, I decided to replace it with the 45 se engine instead. No major price difference. The power difference between the two engines is surprising. When I used to drive over to my friends house to brush hog, I used to have to down shift. Now it's high range...

Have a dead pump and was wondering it there are any surprises when removing the pump. Planning on pulling it tomorrow. Searched but didn't find anything

Does anyone have a diagram for the key switch. I would like to know where each wire on it goes to. Tractor wouldn't start today. Seemed it wasn't getting fuel. Didn't have a test light to check it at that time. But I had issues with my key switch in the past so that's what I am thinking is the...

T2615-91122 ASSY BRACKET 1 hit a rock that snapped the attachment pin and lost the bracket. I need to order from bobcat local due to long delays when ordering from Kioti local. Also much better pricing through bobcat.

About 5 yrs ago I purchased a task force electric log splitter I believe it's a 5 ton model. Ran good for a few years, last year I had to replace the inline resettable fuse with no issues till today. We burned more wood this year than I expected so I went out to split some seasoned logs that I...

I was using my tractor any heard a grinding noise, got off and found gear oil on left front tire was discing in 4wd, noticed outer hub assembly was damaged with the short shft that attaches to the tire assembly hanging out. Pulled it all apart and went to wallace tractor. Rick is a great guy and...

I just picked up a Ferguson TO-30 that"s been sitting in a garage for 15 yrs. It was to good of a deal to pass on. Planning on getting it running this winter. The owner doesn"t know anything about it as it was his father in law who used it and ran it. Presently I don"t even know if it"s been...

Nice to see this site has included foodplots, I think it's a little late in coming. If someone is looking for sites that specialize in foodplots they might want to consider qdma and iowawhitetail. At iowawhitetail look for dbltrees corner as he has spent enough time and money to have his own tv...

They are far from being a good looking tractor, but for what you get they are selling cheap. A local farmer has one, it runs great for him. If I told you what he payed for it, you wouldn't believe me. Basically he said that he paid more for a gas oliver than what he paid for it. Is there a...

I was thinking about a subsoiler for my fields. I have a few areas that stay wet longer and really don't drain well. I was thinking of drain tile but think that would be an overkill. Anyone with any subsoiler experience. I know whatever I purchase will be shear pin protected.

A friend is looking @ one it has high hrs but dynoed at the rated factory hp. Any specific points to look at with that model?

The partners are splitting us and just gave is a song and dance when we ordered our tiller from them. They told us it would ship in 3 days, got excuses why it didn't ship for 2 weeks after we ordered it. Two weeks later and still it didn't ship. Finally today the girl on the phone came clean and...

My local PF group is looking at a used 4 row, no till with fert and insect boxes. Any info would be helpful. Thanks.

Has anyone financed a tractor that's over 20 years old. I don't like the idea of a home equity loan. Most of the sites I've seen are for loans on equipment less than 6 years old and I'm not interested in an apr that's high. I just really want an old 4020.

I ended up passing on a hydraulic sprayer and found a 3 point 55 gallon myers sprayer. It looks like it was a mist type that was converted to a boom sprayer. The owner didn't winterize it correctly and cracked the pump. I did a search and saw that the pump is an arm and a leg and plan on making...

I never saw a sprayer with a hydraulic pump instead of a pto pump. It's on a trailer mounted sprayer tow behind boom sprayer. I'm a little concerned since I've only seen pto sprayers. Not sure if I should pull the trigger. Anyone with info on one would be greatly appreciated.

You always hear about a tractor that has problems, but I was looking for a list of models to avoid and why since there is a general consensus that they were a problem poor design. Such as the JD 2840 which is known for problems with cases splitting due to not enough connection bolts and also...

I was curious to see if you were still happy with the truck and how it was running?

Found one on craigs list and was thinking of picking it up for spreading ag lime. Are they worth it, or am I better off just having the truck do my fields. Last year I didn't want to take a chance with how wet the fields were. I can get 22 tons of ag lime delivered for roughly $250. That was...

I've been looking for a cultipacker for a good while now and finally found one that wasn't overpriced. I've been to a few farm auctions expecting to see them go for 150-300 dollars only to see them end up selling for close to 500 which isn't a deal at all. I finally found one on craigs list...

Opened up my new bowhunter magazine and saw a kioti ad with a ck series tractor carrying items in the bucket. What made it odd is that the loader bucket was green. Tractor was normal color. You would have swore they took it off a JD.

I was driving home and stopped off at on estate sale of an old long retired doctor. Caught it when silent bids go to half ended up picking up a 3 point tiller for $212., it looks like it was barely used. It has Farm and Country and Valu-bilt tillers on it. Anyone familiar with them? I think it...

Picked one up yesterday. Only has corn plate in it are there other plates available. I read somewhere where the 71 plates work. While I like using it for corn I was interested in planting other seeds also. What's the easiest way to clean the fertilizer canisters. One side is frozen up but the...

I'm going to pickup what I believe is a JD 246, 3 point, corn planter this evening, I didn't bring the trailer with me when I went to look at it or it would already be home. Fertilizer canisters are intact, farmer got ill this summer and had to retire never cleaned out the canisters. Fert on one...

I was at the local JD dealer last week and saw the sticker on a 5101E @ $42,000 without a loader. That's cheaper than most other brands cab models in a similar size. Is it an outsourced model or is it missing most JD features and basically just a stripped down model?

When you look at units sold the 15 series sold a fraction of what the 10 series sold. There isn't much of a power or weight difference but the 15 only had a 1000 rpm pto while the 10 had both the 540 and 1000. Locally you see pricing on the 15 series lower than a similiar 10 series.

Saw one on a trailer next to me when I was fueling up the pickup yesterday. It looked cosmetically restored so it was rather nice looking. The person pulling the trailer was inside paying for his diesel so I didn't talk to him. Wasn't this basically a 4020 with a turbo? Nice tractor, seems to...

Will sweat corn rot or dry out if left on the stalk. The reason I'm asking is I got a large about of sweet corn seeds about 50 lbs in 5lb bags from a friend. It's obviously more than I can plant for ourselves and I was thinking about planting it in a food plot next year and possibly selling...

That past year it's been wet in NE Pa. until the past week it rained all summer causing planting and plowing issues, my neighbor asked if it would be better to pickup a tiller instead of plowing since running a plow this past year was always a problem with lack of traction or spinning tires in...

Found one locally that is a fair price, but needs a little work. I was wondering if parts are easily available for them? Are there any online sources?

Using the tractor today, dk 40 se, when the pedal didn't feel right, looked down and it was no longer attached to the plastic mount on the bottom. It looks like the whole pedal is basically plastic, seems like a poor design. It was not something I expected to have to replace. Dealer has to order...

Thinking of buying one tomorrow and was wondering how it worked and lasted quality wise. I'm looking at it for fertilizer and lime spreading and very little to no seeding.

I received a flyer about a new store opening and took the flyer with me for todays grand opening. I got a free hat and an incredible deal on roundup. I went there to buy the generic version 2.5 gal of roundup for $89.99 and they were out of it. I was sent all through the store to where it might...

I was talking about looking for a baler at work and it turns out my coworker has an old 14T or 24T with a poney motor under a tarp at home. The engine doesn't run well I believe it's one of the old 2 cycle engines. Does anyone know if you can still get part for those old engines? and if you...

Is anyone familiar with them, I found one local just up the road, he had that and a NH 66 for sale. I read that the 66 was mostly wood so I wasn't interested. The 303 is a small twine model are parts available. When I searched online there wasn't much listed for the 303. So I wasn't sure how...

I can get either the m-96 new or the herd 750 used. It seems the M-96 fits my uses better but the used 750 would be abut $200.00 less than the M-96 and it's in excellent condition just a few rust spots. I had given the guy a very low offer then it was listed local and now if I want it it's mine...

I was wondering what older reasonably priced balers were available for some of the smaller tractors today. I know about the jd 14t, the MF 124, and IH 57 but was wondering what other units are out there. I was hoping to use this thread to make a list for future searches. Also are there any...

I found one used local for a fair price and was wondering how small amounts can this seed down to without having issues with pattern. I've read about the m-96 but not the 750. If it wasn't for the price on he 750 I'd be looking smaller.

I was looking at the new 2009 catalog and it's showing countyline attachments that were KingKutter last year. It looks like they actually just used the old KingKutter pictures from last year and just changed the top of the page. I would have asked about it yesterday when I was at my local store...

There are a fair amount of them used that are priced much lower when compared to other makes. White and Allis seem to be the lowest. Is it due to parts availability, quality of construction, or just a lack of a strong following?

This doesn't just mean fuel costs but operating costs also. I'm interested in tractors that were out of warranty that didn't break the bank.

Rick needs to pay for the new truck......:D Just kidding about the price increase..

A friend found one local and told me about it today. I haven't found much online and was hoping that someone here would be familiar with it. I know it's in working condition and the price is fair.

I'm looking at a single or two row planter for next spring and thought I'd post now to give my some time to find one. I've heard that the jd 71 is a good one and am also considering cole and coventry. I was very surprised at how much a new cole was as I haven't seen any used one's local. Any...

I was looking for a king kutter middle buster and all they had was farm force. When I asked if they had a king kutter middle buster or could get one they said they weren't going to carry the brand anymore as they were filiing for bankruptsy, I assume in certain items only. It seemed fishy to me...

I saw there's one for sale in thepapershop.com it's located in Factoryville,Pa. which is in northeastern Pa. The plow is not mine nor do I know the seller or ever met them I just saw the price and wished I could pull it. I however did see Wallace Tractors ad in the same paper for a 18 foot...

I had been leaning toward a disk harrow but haven't found great pricing on one, and now am thinking of waiting til I find a used one at a fair price even if it takes till next year or longer. I can't justify the cost of what they're asking for new disks and think you get your moneys worth out of...

I'm looking for a 72" bar for my Kioti. I should have bought it when I got the tractor. Does anyone know how many teeth are on the woods bar. I haven't been able to find anything on the net.

It has something to do with emissions for 2009. But I heard they are coming out with a dk80 or 85.

Looking into a disk harrow the local dealer recomended hawk line over woods is there a significant quality difference. The woods was 400 more for the same size.

So far I'm very happy with the Kioti tractor loader and backhoe, it runs really well. I was surprised by how stronger the loader was compared to other machines in it's size. I'm glad I picked the kioti and Wallace tractor not only gave an incredible price on the machine but on the woods...

Kioti DK 40se 4wd. I know the rule of thumb is 12-15 hp per plow. I can get a triple bottom really cheap and I guess the worst that it could be would be to just make it a double bottom.

We got a good price from Wallace Tractor. We got the tractor loader backhoe combo with a second set of rear remotes. Their prices on woods attachments is really low. We purchased a bb72x rotary cutter for $50.00 more than what another local place wanted for a heritage hss72. We ended up picking...

Both are a 7' rakes with guage wheels and their commercial rated. The woods is $200.00 more

It was like pulling teeth, really. I was interested in a Kioti rotary mower, midwest makes it for them, and wanted to find out more about midwest since I knew they made boxblades, landscape rakes, and discs. Their website is different from last week and none of the links work. There was nobody...

I was just curious. Looking to buy one.

Called wallaces to find out that the TLB went up to $26,100 that from $24.5 last year fall. $1,600 increase from November that's almost 7%. Does anyone know of a kioti dealer that's got better pricing since I don't mind traveling. Right now that's not a big price difference between kubota.

I was surprised how close these two models are in price with the tlb combo within $500.00 Does anyone know if the front diff on the kioti is a limited slip? Dealer didn't know which I guess means no. This would be for the father-in-law. Both dealers about the same distance from his location...

My local Kubota dealer is pricy and higher than what others here have posted and seems to be offering only list price, and yesterday I looked at a Kioti 65s and it was about 5 thousand more than the farmtrac, only plus was that it comes with a perkins and I have to upgrade to the 675 in the...

I was curious if there were any brands to stay away from when buying a backhoe attachment for a tractor with 52 pto horsepower. There seems to be a significant difference in pricing.

I saw a price listed on this site for less than 29 for the same new tractor with loader and called the local dealer in Dallas, Pa. C. H. Waltz Sons and got the much higher price. Did I get list price or was the other guy getting a steal?

We have 100 acres in Northeastern Pa, with about 25 of farm fields that hasn't been farmed in the past 6 years. Looking for a tractor to do some hay and general grounds work, snow, etc. The dk55 and 550 are syncro while the 555 is more of a traditional style tractor trans. I read that farm trac...