cub cadet yanmar ex3200

Apparently you can't buy a 3 Point hitch kit directly from Yanmar for the ex3200 anymore. I spoke with the guys at Hoye and they have a generic kit that they thought would work but they weren't sure about the arm length. They said theirs was 29 inches on center in the kit. Can someone out...

Greetings, My tractor mechanic is stating my tachometer is locked up / froze and keeps breaking cables. The mechanic's part source says at least 1 month for part and may be never if part is discontinued. From my research, the part number would be CY-1A8160-56110 METER ASSY. Online parts...

For starters I'm a city boy who doesn't know much about tractors. I'm on a mission to find a brush hog for a Yanmar ex3200. Based on hp at the pto it looks like a 5ft cutter is what I need. The issue I'm getting into is the dealer is saying they don't make one for this tractor anymore and I...

Hi everyone, i have the same issue with the temp and fuel gauge on Cub Cadet Yanmar EX3200, did anyone ever get this resolved or insight. very frustrating mine works sometimes and sometimes not. they are both affected

I have a 2015 Yanmar EX3200 and I just noticed that a rubber tube / hose (right arrow in the picture) that was under my seat is not connected to anything on either end. I looked around and saw that a port or (left arrow), whatever it's called, is open. I assume this hose should connect to this...

I've just joined today and left a question on the Yanmar page about adding a belly mower, mostly how folks feel about the job it does. It seems most people aren't happy with how it mounts and detaches, that isn't surprising if it's anything like my cousins John Deere (in Scott's disguise).

Hello , I just joined up and already have a question. I was directed to the site by a fella who uses the name Winston on MTF, he also shared a thread on removing the mower deck from a Yanmar ex3200. I'm thinking of adding the MMM to my tractor but I'd like some feed back from anyone who has...

Hi all, Shopping for my first tractor. I have zero experience and am still trying to learn all the basics so that I am happy with my decision. I will be using it mostly for moving mulch, topsoil, sand and firewood in addition to plowing and maintaining our 900' steeply sloped gravel driveway...

Hey anyone out there have a ex3200 with front loader meteor snowblower on it? If so I need help with switch over to loader being dealer set up. They gave me all these parts etc with machine. I am thinking however that all I need to do is disconnect blower leaving control gear on. Disconnecting...

I have been researching tractors to purchase and continue to be directed to TBN and have found the posts very helpful so I thought I would join and see what you all had to tell me. I have a 2 acre property, which I bought 6 months ago, but only really need a tractor for projects like heavy...

I am looking for a back blade for my new tractor, the tractor is 59" wide and I plan on using the blade to cut some shallow ditches to drain my pasture and also maintain my gravel driveway. The dealer where I bought the tractor is offering a good deal on a Woods RB7200 he has in stock. This...

Back again with indecision. 3 acres in Texas hill country, flat and the big trees gone. Will have to mow, haul mulch and small rock. A lot of small trees and brush to remove. I have looked at almost every tractor around 30 hp and am down to these 2. Please advise. Thanks

I thought I had worked out a deal on a Yanmar Ex3200. It was displayed with a belly mounted mower. I told the dealer that I didn't need the belly mower. Upon delivery, the mower was gone AND the mid PTO. I was expecting the tractor to come with the mid PTO. I want the option of a future belly...

I'm on the verge of purchasing a new Yanmar EX3200. Would this be a good decision? I'm also considering a Kubota 3300SU.

Hi All-- I've had a Yanmar 1610D for a number of years now and feel it's time to get something new. Since I know Yanmar's pretty well and trust them I'm attracted to the Cub Cadet/Yanmar EX 3200 or Ex2900 (I don't care very much about the difference). Problem is I want it in Northern...

It was a stupid move. I wanted to move one more bucket of dirt before dark and my angle was wrong. With the incline to steep the tractor rolled over to lay on it's right hand (air intake) side. I did upright it within 5 minutes and tried to start it. It only clicked so as I had read on this...

I am considering the EX3200 (instead of the SC2400)...Dealer has quoted $18,500. for 3200 with just FEL. This sounds a little high? Also..dealer says that the 3200 only has a mid PTO if you buy a kit? The 3200 with the mid PTO & MMM is $22,100. Again....sounds high...? Anyone have price...

I have a new ex3200 and am wondering what transmission/hydraulic oil I can use in this tractor. The only specs I found were for Cub Cadet Hydraulic/Transmission Fluid to be used. They don't give the fluids weights or specs or anything. Anybody know what other fluid I can put inthere that is...

Looking for a mechanical thumb for the CB75 backhoe on my Ex3200 tractor/loader/backhoe. Anyone know who makes the backhoe for the Ex3200? Would prefer a bolt-on thumb so it can be removed if not needed. BTW, the Ex3200 is a nice machine. Very happy with it.

I'm having quite a time trying to get information about where the power beyond ports are on my Cub/Yanmar EX3200. I talked to my dealer but no luck, I probably need to go there and rifle through shop manuals to get an answer. I looked at the JD parts site for the 790 and 3005 models. Seems to...

I am seriously considering buying the Cub/Yanmar EX3200. I have driven just about every other brand tractor in it's size class (32hp) and for the money/warranty this seems to be a good tractor. It actually is similar to the JD 3203 that I drove today. I realize this is a new tractor model/style...