cub cadet yanmar sc2400

Cub Cadet Yanmar SC2400 tractor diesel. 324 hours. Full service @ 300 hours. 60" mid mount PTO driven mower. 3 point hitch. Hydraulic loader. Runs great. Two new front tires.

Hello, I have a Yanmar SC2400 and in dire need of a replacement front rim. I found a set with tires on from eBay for almost $500 and just can’t afford them. I am only in need of 1-10” rim with 5 lug (10x7) part #1A7880-14800 if anyone knows of one anywhere please let me know where. Any help...

Hello, I have a Yanmar SC2400 and in dire need of a replacement front rim. I found a set with tires on from eBay for almost $500 and just can’t afford them. I am only in need of 1-10” rim with 5 lug (10x7) if anyone knows of one anywhere please let me know where. Any help finding this rim is...

I know this is the JD forum but this motor is similar or the same as some of the JD scuts (i even get my parts from the JD dealer), and yall are smart and more active than the yanmar forum 1) Tractor has roughly 500 hours on it and has moved/blown snow great all winter until recently when it...

Hello all, first post here however I've been getting great information from these forums for years. I've come for help today, hoping someone can point me in the right direction. I recently bought a Cub Cadet Yanmar SC2400 in great condition with low hours, well taken care of by an older...

Hello all, first post here however I've been getting great information from these forums for years. I've come for help today, hoping someone can point me in the right direction. I recently bought a Cub Cadet Yanmar SC2400 in great condition with low hours, well taken care of by an older...

My granddad recently passed and he left behind a 2011 Yanmar SC2400 with about 530 hours and since he got it in 2012 it has been very reliable. It still is, but the transmission has been acting funny. I first noticed that when I release the forward pedal, it jerks to a stop as if it's pulling...

Is this a good deal: 200 hours 4WD Loader 60" MMM Extra set of front wheels with turf tread Do not yet know the year. Looks like brand new for $10,000. Thanks Yooper Dave

I am researching increasing my hydraulic pressure on my Yanmar Sc2400 to improve loader and 3 pt lift capacity. I do have a digital copy of the shop manual, and it states do not exceed 1875psi. This note is referenced on the hydraulic circuit diagram for the power steering cylinder...

Does anyone know a supplier that can reliably provide parts for a Yanmar sc2400 tractor to Australia. Thanking you in anticipation.

Replace the PTO oil seal on cub cadet yanmar sc2400

I have looked online at Wolverine and they say the pan needs to be flat. I cannot find a very large flat spot. Tractor is a 2012 Yanmar sc2400. I am certain someone out there is using one but want to know what? Thanks

Does anyone know where I can find parts for the cub cadet yanmar sc2400? I located one dealer in new york and they can order a new dip stick for the transmission but they don't carry many parts and the shipping fee from yanmar is over 40.00 for a 5.00 part. Hopefully someone carries parts for...

Trying to find the brush guard and the front plow...since yanmar and cub cadet aren't partners anymore can't find the 2 attachments...Anybody have any ideas.

I need some help guys! I have a 2012 yanmar sc2400. I hauled it on a trailer about 5 miles to do some tilling at a friends house, when I got there my tractor would not go into reverse! It worked fine when loading the tractor on to the trailer but now nothing! There are only 45 hours on the...

Parked my Sc2400 yesterday after blowing snow for about 3 hours. Today it won't start. Turn key to the preheat position all is normal (hear clicking) few seconds later turn key to start position and nothing happens. Checked fuses 25 amp start fuse has no 12v either side. Activate seat...

I just purchased a SC2400 at auction with only 71hrs..was going to turn around and flip it but decided to keep it upon reading about how everybody likes this tractor. Now I'm looking to get some attachments. Thinking about a snowblower, roof and ?. Wanted to hear from others who own the...

Hello All, I'm new to the forum world and though I am only 28, I have never found the need for forums... till' now! My wife and I recently purchased our first home and with it came 2 acres. Though I am not new to working land as I grew up on a large cattle ranch that my parents still own...

I've determined a SCUT is what I need to take care of the large yard, maintain the gravel drive and so some landscaping around the property. I am looking at a 2010 Yanmar SC2400 with FEL, MMM, rear blade and a cab enclosure. The tractor has 155 hours so it hasn't been used a lot the last three...

For anyone that has this tractor with a mid mount mower, I have a question. What is the process of putting on and taking off the mower? I an trying to decide if I should get a mid mount or rear mount.. Also about how long time wise does the process take?

This is the last one the dealer has that is dual branded, giving a good deal. I have not had them show me yet how the 60 inch deck and loader remove. Hope its not too hard. Has anyone hooked a one or two bottom plow to one of these? I was wondering how it would do plowing, my soil sand. How...

On 7-23-2011 I purchased a New Cub Yanmar SC 2400 TL. As soon as I got it home and began to work with the loader I noticed a problem. When the tractor was put under load the range selector would vibrate violently and jump from low range to high. Since I have had the tractor this has been a...

Originally put this under Yanmar I am on a very limited income. I wanted a new tractor and the SC2400 was within reach. I live on 227 acres that has had some but not a great deal of management over the past 20 years. To cut it short I am using this little tractor as if it is a big boy. The...

I am on a very limited income. I wanted a new tractor and the SC2400 was within reach. I live on 227 acres that has had some but not a great deal of management over the past 20 years. To cut it short I am using this little tractor as if it is a big boy. The problem I have encountered is the...

Hi looking for some feed back about the sc2400 test drove one today at the dealer nice tractor.My concern is that it seems to bog down when the mower is engaged when trying to go up a hill does not matter in high or low range.The rpm's would go from 3500 to 2500 is this common? I have a bx2230...

Posted this on the Cub page also. Looking for some knowledgable folks to lend some advice. Have been looking at both of these machines and think I'm leaning toward the Cub/Yanmar right now, but have never owned a tractor myself, only used other's a little. Kubota model has more HP at the PTO...

Looking for some knowledgable folks to lend some advice. Have been looking at both of these machines and think I'm leaning toward the Cub/Yanmar right now, but have never owned a tractor myself, only used other's a little. Kubota model has more HP at the PTO, but I like some of the features of...

ive tested both of these tractors with loader and 60" MMM I skid logs here and there mow grass,plow snow,clean out the barn,and other things!! my question is should i go for the bigger caseih??? Im a little scared I will regret the small tires on the 2400 when im skiden logs!! I feel the 2400 is...

Does any one have a sc2400 if so how do you like it?

Does any one have a sc2400 if so how do you like it?