I started the Kubota and went to lift the FEL. The hydraulic pump for the FEL was making lots of noise. Any movement of the power steering also made noise. Like the pump was not getting enough hydraulic fluid. The HST moved the tractor just fine.
The night before was down to single digits. It...
Just a heads up that Case/New Holland is offering OEM and Fleetgard filters for 25% off through April 30 at participating dealers Ordered online as closest dealer not offering discount and got free shipping on $200 or more before discount. My gross total was 211.00 before discount. 158.00 after...
We have a couple water coolers and my wife thinks they need filtered water so I have been buying and hauling home 5 gallon bottles of filtered water. Today I tried 2 places to get the filtered water and the machines were not working. GRRR. Anyway, I am sick of buying water when our water is...
I know it was discussed before but i could not find any info on hydraulic oil filters cross reference.
Just came across this site.
Feel free to delete if this was posted before
https://www.filtersfortractors.com/branson-2515h-filter-cross-reference-info/
Hey, should I grab a filter kit for spring? I was lookin' up air filters and came across this site. Found a kit with a bunch of different filters. Now I’m thinkin’... am I actually gonna use all this, or just tossin’ cash away? :D
My old fuel filter was located low and underneath the tractor by the factory. It was so vulnerable I tore it off at least 3 times when bushhogging areas where there were hidden limbs etc.
I asked the shop to either relocate it or place a guard cage around it to protect it. They placed...
I bought a Harbor Freight pump to drain heating oil from one tank and fill another. Does it matter if the filter is on the intake or outtake side?
Thank you.
On my GC1710, (1500 hrs) when it’s running, rpm’s then die off like it’s not getting fuel. Then sometimes it runs just fine for a hour…Drained some water from fuel filter and replaced filter, but having same problem. Put diesel treatment in fuel tank- no change. Am wanting to bleed air from...
I am looking for some help. I am in the process of changing my hydraulic fluid and filters on my JD2320. For the rear filter (with the magnet inside) near the PTO shaft, it appears the linkage/shaft for the lower 3-point hitch connection needs to slide out to get to the filter. Unfortunately...
The fuel filter housing is susceptible to damage from below. Doing some downed tree clean up I caught a branch between the frame and motor it hit the FF housing. It rotated 90 degrees breaking off the output nipple.
It's a simple fix. Just one bolt for the housing and two snap rings for the...
A while back, my John Deere 430 slowed down, and it turned out the air filter was dirty. I blew it out with compressed air, and the revs went back up.
Seems like it may be slowing down again, and it hasn't been long since I cleaned it.
Is it possible to keep cleaning these things, or is it...
I have a New Holland TC35DA. I ran out of fuel this morning. I filled the tractor with fresh diesel and tried to bleed air from the system by loosening the bleed screw on the pump. No fuel appeared during the bleed. I checked the fuel filter and found no fuel was entering the filter when the...
I'm having a hard time finding a HST filter for my T494. The manual calls out TYM 15532302100 with a new TYM 19265154110 for newer models based on serial number. Apparently I need the newer TYM 19265154110 filter but I can't find a seller. The tractor came with a WD 724/6 MANN FILTER (Germany)...
Renovating the house and thinking about doing a whole house water filter. Does anyone have one you would recommend?
Any other pertinent info about them would be greatly appreciated as well.
I just got back from my Yanmar dealer after picking up engine oil and a filter for the 200 hr service on my SA324. After taking off the old filter I noticed the new one is larger. The dealership is now closed for the weekend. The filter threads and rubber gasket look identically sized, and I...
I have a 471 with cab that has the cab air filter on the outside of the cab on the RH side. I hit a low hanging tree branch and broke the top of the cover. Called my local MF dealer she could not find the part #, she said I will get back to you. When she did call back it was all bad news for me...
I am doing my 50 hrs service myself. I am having some issues with the hst filter. I have kioti brand filter but it seems to be leaking just a bit. My question is when I removed the old filter, there seems to be a magnetic washer that slides around left on the tractor. I tried to remove it but...
DPF light is coming on again, it is time to do something about it. I thought I would turn to YouTube U to learn more about this topic. Lots of videos of guys washing out their DPF filter rather than poking holes in it. I wonder if this works ok. Has anyone cleaned rather than gut the DPF? I...
Today my TC45DA quit like it was out of fuel. I pulled the line from the tank off the filter and nothing run out. I used a compressor at the fuel cap and tried to get fuel to flow wi no luck. Then I blew from the line I took off the filter back to the tank and that got fuel flowing. So I must...
I'm doing the 50-hour service on my MT240he, and am a little confused about what hydraulic filter I need. The manual states a hydraulic filter, but the website has both a hydraulic filter and an HST filter. Anyone know which filter to get? and what hydraulic fluid should I get to replace the...
I have Tool Cat 5610 and I am unable to get air filter out to change. It has broken and full of dirt. How is the best way to get to the housing to remove the whole thing
I have a 254 TYM. , Its main job is snow blowing. Went to do my 50 hour service and broke the suction filter right off. This thing has a 19 mm hex head. Its made of white metal with 4 holes before the inserted threads. It also holds the knuckle for the return block on the hyd/stat case...
I have an obscure older excavator that no one can look up the oil filter. It has a Kubota V2203 engine. The filter on the unit has no markings. The filter measures about 3 inches in diameter and is about 3 inches long. Can anyone give me a part number? Thanks much.
I have a friend that owns a Ferrari model 8586 Articulating tractor. He is need of an oil filter, it has a cartage type filter currently. I'm wondering if any knows of a filter adapter to use a spin-on filter.
Tim
Tractor is a 2020 CK3510HSE (hydrostatic, SE, open cab)
Seems to be a lot of reference for the F6800-16411 fuel filter, including my own manual.
My tractor has a clear bowl and water sensor on the bottom. Looks like EH35-0011A based on what I was able to get from a cellphone pic (side with...
Changed the fuel filter in my MT240 and it is running just fine.
Drilled some holes, ground some stumps, grappled some trees to the burn pile etc, all just fine.
But....
After the filter change, I used the built in primer to get fuel flowing through the lines, but it never really gets hard to...
Hi,
New to posting but have been trying to read a lot of the posts. I am in the process of adding a used 3pt backhoe to my tractor. To get hydraulics to the rear I am basically splitting the hose coming off my power beyond port on my loader and will send the fluid back to the backhoe and then...
Trying to track down a fuel filter for my gray market yanmar fx175d. Time is unfortunately of the essence. Does anyone know if a comparable filter by another manufacturer may be available or is online from ebay my only option. Have local access to all major brand part dealers at the moment here...
What filter are you us for the smaller hydraulic filter on the left side of the engine (looking from seat)that is readily available?
Also, is this a low pressure filter?
NH part number is SBA340501030 (says it has a bypass valve), I couldn’t a cross reference on Baldwin Filters site that is...
So I'm getting a 55 gallon barrel from work, it had hydraulic or way oil in it.
I bought a basic hand pump setup, I want a simple filter from the pump Nozzle to a filter and then simple fuel Nozzle for tractor. Talking maybe 2 gallons a week, BUT I want to have 25/50 gallons on hand...what...
I realize I might be opening a can of worms here, but I am curious by nature.
I notice that different oil filter makers list filters for engines and......
1) they will be made from different filter material (assumed)
2) will have slightly different shapes
3) will have a central hole the...
Curious as to what the typical charge for having a dealer do the 50 hour maintenance on a T474HC would likely be?
I have watched videos of this service, and it doesn't seem too tough, but some did comment on some difficulties with some drain plugs and the hydraulic fluid filter because of...
Anybody had them put on their gutters and do they really work. I've been trying to get an idea what it would cost to have them installed but it seems like no one will give you a basic idea of the cost involved. I've filled in a few online estimate forms that say free estimates, just fill in a...
I know there are a couple threads here… but they are just running conversations, not truly cross references.
My tractor uses the EA00004647A for engine oil. I can buy it from my dealer I’m sure. But, is there a good cross reference? I picked up a couple gallons of Rotella T6 today. Thanks...
Last few years noticed some oil filter cover plates have rectangular openings vs circular, for both engines and hydrostatic drives. The filters are the same size. I believe the relief spring, bypass valve, threads, similar media etc are the same. To put my mind at ease, if original filters used...
DISCLAIMER: YES - I WILL TAKE AND POST SOME PICS LATER TODAY -
Our lot is in a little dead-end valley, and the part that will be farmable once I clear it out - it has not been tended in 50+ years, and there are a good number of substantial trees that need to come down first.
Up on the...
It's probably time to change the fuel filter on my Yanmar FX32D. I see that Hoye has a filter for that tractor, but it looks like it's going to be too big. I measured the glass that it fits into, and it measures about 3" tall and 1.75" wide. The Hoye website has one that is 3.5" tall and 1.9"...