2440 Coolant heater

[loganhorse]

What's the correct one for this tractor?
Finding RE313366 and AT72330. So what's the difference between them??

Thanks.

 

[MORRISONSTEEL]

What's the correct one for this tractor?
Finding RE313366 and AT72330. So what's the difference between them??

Thanks.

Re313366 is the element only for replacement. At72330 is the complete kit for first time install.

 

[loganhorse]

Re313366 is the element only for replacement. At72330 is the complete kit for first time install.

Here is what I have. I feel like I should hear or be able to feel heat when plugged in and I can.

 

[MORRISONSTEEL]

Yep, that's it. Yes you should be able to feel some heat shortly after plugging in. This was a pretty good element but they do fail, re313366 is what you most likely need (or an equivalent tank heater from parts house).

 

[buickanddeere]

Sure glad to see people using block heaters instead of ether, tiger torches, heat guns or tow starting.

 

[buickanddeere]

Forced Flow Circulation Heaters | Phillips & Temro Industries

 

[loganhorse]

Yep, that's it. Yes you should be able to feel some heat shortly after plugging in. This was a pretty good element but they do fail, re313366 is what you most likely need (or an equivalent tank heater from parts house).

Wouldn't happen to know what size the line is would you? I'm not around my tractor currently.

 

[Tx Jim]

hoses are 5/8'' inside diameter 14'' & 16'' long

 

[loganhorse]

Anyone have experience with this?

 

[Zebrafive]

Here is what I have. I feel like I should hear or be able to feel heat when plugged in and I can.

Looks like what's on my 2030, gets very hot to the touch. 20-30 minutes and it starts the tractor easy.