Broken but is it broken?

   / Broken but is it broken?
  • Thread Starter
#11  
Is it the tee thats broke, or just the line/line fittings? If its just the line and fittings, I would think you could find some really cheap at any tractor/farm store.

It is the line and fittings, but....The end at the tee is a thread not found on most tee's. I am not sure were to find that thread with a hose barb to make my own line , but then comes the outer end.... It has an elbow fitting with a little bitty orifice, an incorporated into that was a blade connector and a wire that went around the fitting and into the intake manifold. I have no idea what that was for.
I will try to get pics.
 
   / Broken but is it broken?
  • Thread Starter
#12  
DSCN6699.jpgDSCN6700.jpgDSCN6701.jpg
 
   / Broken but is it broken?
  • Thread Starter
#13  
The wire was stretched out some during disassembly.
 
   / Broken but is it broken? #14  
Seems you have broken the Thermostart cold start helper.
 
   / Broken but is it broken? #15  
thermostart_heater_8450big.jpg
 
   / Broken but is it broken?
  • Thread Starter
#17  
THANKS...ALOT!
Thanks to both of you, Agvg and Midniteoyl

It is nice to have friends in far away places.

Part ordered.

Until I get the line fixed, I can plug the intake and the line and run the tractor.
 
Last edited:
   / Broken but is it broken?
  • Thread Starter
#18  
I just looked it up on messicks now that I know what it is.
The glow plug is $58 and the tube is $145.
What did we do before ebay?
 
   / Broken but is it broken? #19  
I just looked it up on messicks now that I know what it is.
The glow plug is $58 and the tube is $145.
What did we do before ebay?

I dunno.. But i bet if you msg the ebay seller, he just might have the tube, or know what you need to make your own.
 
   / Broken but is it broken?
  • Thread Starter
#20  
Great idea!
I will give it a try.
 
 
Top