SSdoxie
Elite Member
Carbide bit set and good extractors sounkd like great Christmas Stocking Stuffers to me. Hint Hint :thumbsup:
Broken zerk -- can't get it out
- Thread starter ddb123
- Start date
- Views: 41345
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
no doubt!
OP
ddb123
Platinum Member
Duly noted and will add to my "To Acquire" list. I am slowly building a tool collection.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
now that he knowsexactly how to remove them, and may soom have all the specialy tools.. he's pretty much assured to not have any break anymore.. 
seems to happen that way..
I needed a large bearing puller for like 5 ys.. finally went out and got one.. used it 1x and now havn't seen or needed t he thing in 2ys.. lost somewhere inthe bottom of the tool cabinet..
best of luck to the OP!
seems to happen that way..
I needed a large bearing puller for like 5 ys.. finally went out and got one.. used it 1x and now havn't seen or needed t he thing in 2ys.. lost somewhere inthe bottom of the tool cabinet..
best of luck to the OP!
sixdogs
Super Star Member
- Joined
- Dec 8, 2007
- Messages
- 15,704
- Location
- Ohio
- Tractor
- Kubota M7040, Kubota MX5100, Deere 790 TLB, Farmall Super C
now that he knowsexactly how to remove them, and may soom have all the specialy tools.. he's pretty much assured to not have any break anymore..
seems to happen that way..
I needed a large bearing puller for like 5 ys.. finally went out and got one.. used it 1x and now havn't seen or needed t he thing in 2ys.. lost somewhere inthe bottom of the tool cabinet..
best of luck to the OP!
Great observation and I'm afraid will prove true. I have a number of "one-off" tools that I bought to never endure again the painfull process i just went through and the tools are still new in the box. In fact, I think I have some stubby easy-outs specifically for broken grease zerks. Bought them maybe 15 years ago when I broke the last zerk. Oughta be a law.
RaydaKub
Veteran Member
sixdogs said:
Doesn't matter. He who dies with the most toys wins.
Or as a friend put it, it's not a real project if it doesn't require at least one new tool.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yup.. i've got a few myself that were taken out of the package.. waved over the project for 10 seconds to do that 1 single task wich they are needed for.. and then cleaned and put back up.. hopedfully to be found if ever needed avain.. befroe they rust or dry rot..
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,619
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
Some tools are like insurance...Gotta' have it, but hope you never have to use it again..!!
After restoring, rebuilding numerous old tractors, and hit & miss engines, I've gotten several repeat uses out of tools like those.
After restoring, rebuilding numerous old tractors, and hit & miss engines, I've gotten several repeat uses out of tools like those.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
reminds me of the extension I got for my lug/breaker bar for my f450 dually. the dish is real deep in the back on the 19.5" rims, and I was always scratching the aluminum covers.. I got the extension 2ys ago and now have never used it..
