brush hog

[Kitz]

Hi i have a 17 hp kubota can i use a bush hog with this and how big can anyone help thanks rick

 

[TripleR]

Land Pride and Woods make cutters for that size, they are 42" cut; others may also.

 

[kebo]

Here's a 40" mower you can get through a TSC store. Should be worth a look at it. The whole KingKutter lineup of XB products are designed for subcompacts such as yours.


King Kutter Incorporated

 

[MarkV]

What model Kubota do you own littlefarmer?

MarkV

 

[Kitz]

That would be a b7200 thanks for input guys

 

[Andy in Gap]

I run a 4 foot bush hog on my 18 hp Yanmar, never have had any trouble with too little power. I'd get a 4 footer, much easier to find used and will pretty much cover the area you drive over. If you get in the thick stuff, just slow down.:thumbsup:

 

[Will_C]

Another vote for a 48" cutter. If you want used, much easier to find than a 40 or 42" model. If you want new, you can choose anything from a $600 economy model to heavy duty units. If you want a heavier built unit, check the weight. Some may get a little too heavy for your tractor.

Will

 

[Kitz]

Thanks alot everyone 48" is what ill have my eyes on

 

[IslandTractor]

One more vote for the 48. I used a 48 on a 20hp Kioti with no trouble at all in brush clearing and pasture mowing and I rarely ran it at PTO speed.

 

[aczlan]

I have run a 60" on our B7500, it was a little more than it wanted to handle, but it ran it. Loader on the front was a must have though.

Aaron Z