Bumper Vs. Gooseneck Payloads

Status
Not open for further replies.
   / Bumper Vs. Gooseneck Payloads #51  
Didnt really mean to sound like an but head, just reading your other post about your truck is rated for 15k and you said you can haul 25k, thats about 40 to 45% more than its rated for, thats like me saying I am good for 24K and I am ok with 34K, Their no way I can be ok with that, got to remember if getting into an accident, the other person lawyer would have a field day with this kind of stuff. just be safe.

Took it that way, but thats ok. Used to have a class A and hauled some big iron through your neighborhood. Following the manual doesn't make the load safe and hauling a lawnmower on a trailer doesn't make one experienced.
 
   / Bumper Vs. Gooseneck Payloads
  • Thread Starter
#52  
Nobody is mentioning weight distribution bumper pull hitches. Does anyone use these anymore? I towed with one on a 3000 mile trip to Alaska and now hate having to use standard drawbar.

I used one with a camp trailer. It really makes a difference. One of the goals in re-building my trailer (now that I've decided to go bumper pull) is to make it compatible with a WD hitch. I don't think I'll use it all the time, but if I'm pushing the limit of my truck and trailer capacity, I'll probably use it.
 
   / Bumper Vs. Gooseneck Payloads #53  
Just reading your other post about your truck is rated for 15k and you said you can haul 25k, thats about 40 to 45% more than its rated for, thats like me saying I am good for 24K and I am ok with 34K, Their no way I can be ok with that, got to remember if getting into an accident, the other person lawyer would have a field day with this kind of stuff. just be safe.

In some states your example would be fine. You can take a 1ton doully that has a factory GCWR of ~24k and register it like a semi but only 36k and then hook up to a 24k tandem doully gooseneck trailer and load all the way to 36k and be legal. You would need a CDL to do this if it is not farm use but if the brakes are matained you would be safe and legal. I don't know if I would do this but it can be done safely and legally.

Ed
 
   / Bumper Vs. Gooseneck Payloads #54  
Well AGGIE00 does bring up some fairly interesting points. It seems like there are basically 2 groups of people here. One that looks at stickers and ratings, and nothing else and always makes sure they are under that rating. And then the other group that knows the limitations of their equipment and themselves and go with that regardless of the little stickers.

In my opinion it really depends on where you are, and what you are doing. Being a commercial driver and driving across the country over your sticker weight is a lot different then the local farmer driving 5 miles from one farm to another being double his sticker.

It seems that weight debates always turn into being sticker & legal debates. The sticker weight is set by the manf. with a certain CYA factor and assuming you are going to be driving at 65 mph. The legal side will follow the sticker regardless of any common sense & based on the same assumptions. If you look at semi, or dump trucks, the only difference in the legal capacity of some of them is what a little piece of paper says. Semi's are maxed out at 80k because thats what is "safe" for the roads and everything else. With a piece of paper from the gov that same tractor can pull 120k as a permitted load. If I say that I pulled a 18k load without brakes with my 1/2 ton rated for a 8k trailer I would get hammered with legal/sticker stuff. Now if I say that 18k load was a gravity wagon full of corn that I pulled 8 miles from one farm to the other with a max speed of 20 mph and an SMV sign some would understand and say I was pushing it a little, but OK. Others would cry legal weight and say I wasn't safe.

So what I'm saying is what works for me may not work for you. I have NEVER heard of a non com truck get pulled over around here and get checked for weight. But if I was a for hire/com driver going cross country on the interstate I would follow my legal numbers. And yeah I don't drive for a living, but I do have my class A CDL, combination, air......

Sorry for the rant. :D
 
   / Bumper Vs. Gooseneck Payloads #55  
Not above the law, but willing to pay the fine when it comes.

Save your lecturette for the guys in uniform, most of us here have at least a good enough working knowledge when it comes to hauling and doing it legally.

They must LOVE you and your attitude at the weigh stations, if you have ever even BEEN weighed yet.

"Look here rookie, I just KNOW that this rig is safe 5 tons over what the durned stickers say, so why don't Ya just waive me through ?"
"I'm a farm boy, I know WAY more than them thar engine_ears that just put numbers on stickers about what breaks where."
"OK, I'll give Ya the twenty bux, now I'm leavin' here."

YOU can leave, the RIG stays until it is legal.
 
   / Bumper Vs. Gooseneck Payloads #56  
Save your lecturette for the guys in uniform, most of us here have at least a good enough working knowledge when it comes to hauling and doing it legally.

They must LOVE you and your attitude at the weigh stations, if you have ever even BEEN weighed yet.

"Look here rookie, I just KNOW that this rig is safe 5 tons over what the durned stickers say, so why don't Ya just waive me through ?"
"I'm a farm boy, I know WAY more than them thar engine_ears that just put numbers on stickers about what breaks where."
"OK, I'll give Ya the twenty bux, now I'm leavin' here."

YOU can leave, the RIG stays until it is legal.

Well here's another lecturette since you need it. Every now and then I would run an International 9400 with a 50t eager beaver lowboy. It is licensed to gross 80k. I hauled a crane to Pearland that put me at 115k. To make that happen I bought a permit for overweight and overwidth. Yes I did get weighed, but really they only pulled me over to see if I had the correct permit knowing I was overweight. Now that we run a skidsteer I bough a utility gooseneck trailer to keep DOT off my butt because they will pull me over checking for cdl and weight configuration if I have a tandem dovetail with dualls. Still a rookie? I know the law and have worked within it, but am making the argument that stickers aren't the end all. I know that just because you have hauled your lawnmower on a 4x6 trailer you are an experienced truck driver, but try and understand my point.
 
   / Bumper Vs. Gooseneck Payloads #57  
Not all of us law abiders obey the law due to a lack of common sense. Some of us know that we could haul more than we are - in some circumstances - and do it safely. We just choose to follow the law anyway.
 
   / Bumper Vs. Gooseneck Payloads #58  
Not all of us law abiders obey the law due to a lack of common sense. Some of us know that we could haul more than we are - in some circumstances - and do it safely. We just choose to follow the law anyway.

Good for you and I also suppose that means you never speed or right turn on red without coming to a complete stop.
 
   / Bumper Vs. Gooseneck Payloads
  • Thread Starter
#59  
...just because you have hauled your lawnmower on a 4x6 trailer you are an experienced truck driver...

Common, Man!! You just blew my whole identity. I gave up my woodworker identity when I quit sitting on the couch in the family room watching Norm Abrams. My cool identity was totally shot when we traded in the LTZ sedan for a minivan. Now you've crushed my experienced truck driver status. All I have left are a bunch of broken down lawn mowers in the back of the pasture. I must be a mechanic.
 
   / Bumper Vs. Gooseneck Payloads #60  
They must LOVE you and your attitude at the weigh stations, if you have ever even BEEN weighed yet.

"Look here rookie, I just KNOW that this rig is safe 5 tons over what the durned stickers say, so why don't Ya just waive me through ?"
"I'm a farm boy, I know WAY more than them thar engine_ears that just put numbers on stickers about what breaks where."
"OK, I'll give Ya the twenty bux, now I'm leavin' here."

YOU can leave, the RIG stays until it is legal.

I don't know about AGGIE00 but many people take 1 tons grossing between 30k and 36k through weigh stations with no problems. (They have CDLs) It is all in how it is registered. What happens is they get apportioned plates from the fed DOT and bypass the state altogether. When they do this they can weigh whatever they want as long as they have paid for that weight and don't go over any of the axel ratings (if they have the right license). Also, I believe they can do the same thing with farm tags in many states, pay for the weight and if you stay under the axel ratings you are fine. A lot of the big trailers they use have electric over hydraulic disc brakes and they can stop in a shorter distance than a half ton with a 7k trailer with brakes on one axel.

I think the way vehicles are plated and the different classes of licenses for drivers could be much better but the way it is now these things can be done legally.

Ed
 
Status
Not open for further replies.

Tractor & Equipment Auctions

2014 AUDI A6 AWD Sedan (A56859)
2014 AUDI A6 AWD...
UNUSED PAIR OF MINI RUBBER TRACKS (A52706)
UNUSED PAIR OF...
1" Pneumatic Impact Wrench (A59076)
1" Pneumatic...
2008 CAT D4K XL (A58216)
2008 CAT D4K XL...
2007 FREIGHTLINER COLUMBIA 120 (A58214)
2007 FREIGHTLINER...
SKID STEER ATTACHMENT (A58214)
SKID STEER...
 
Top