Detach 48x28 Garage - Footings

   / Detach 48x28 Garage - Footings #71  
Just had 4.5yds delivered last Saturday
1.6-bridge approach
2.5-21x10 barn slab
The rest in concrete “piers”

$743
 
   / Detach 48x28 Garage - Footings
  • Thread Starter
#76  
Pricing out the 3 steel I-Beams that I will need to support my SIP roof. The beams will span 48' from gable to gable end.

W21x44 Wide Flange Beam = $2,200 per beam
 
   / Detach 48x28 Garage - Footings #77  
Pricing out the 3 steel I-Beams that I will need to support my SIP roof. The beams will span 48' from gable to gable end.

W21x44 Wide Flange Beam = $2,200 per beam
Not bad. About a buck a pound which is about right for steel structural members
 
   / Detach 48x28 Garage - Footings
  • Thread Starter
#78  
The 53' semi trailer can't make it up my driveway. So I was think of unloading on the street and placing the 48' beam on the 18' long trailer (see pic). Of course that means 30' will hang off the trailer but if we strap down the beam to the trailer, I don't see an issue going 10mph up the driveway.

trailer.jpg
 
   / Detach 48x28 Garage - Footings #79  
The 53' semi trailer can't make it up my driveway. So I was think of unloading on the street and placing the 48' beam on the 18' long trailer (see pic). Of course that means 30' will hang off the trailer but if we strap down the beam to the trailer, I don't see an issue going 10mph up the driveway.

View attachment 801100
I’ve been down this road before….32’ door on 20’ trailer
Put some pallets/cribbing on the tail of the trailer
 
   / Detach 48x28 Garage - Footings #80  
The 53' semi trailer can't make it up my driveway. So I was think of unloading on the street and placing the 48' beam on the 18' long trailer (see pic). Of course that means 30' will hang off the trailer but if we strap down the beam to the trailer, I don't see an issue going 10mph up the driveway.

View attachment 801100
negative tongue weight?
 
 
Top