Loader DL100 how hard is rebuilding tilt cylinder?

   / DL100 how hard is rebuilding tilt cylinder? #1  
Dmacleo

Dmacleo

Veteran Member
Joined
Sep 11, 2020
Messages
1,527
Location
Etna, Maine
Tractor
2010 MF GC2400 Owner, 2012 MF1532 User
just found a wet spot on LH tilt cylinder frame, need to monitor. looks like small seepage vs big leak but want to get info ahead of time as this is a 2010 and original.
where the end does not have a wrench flat does pipe wrench work ok?
agco lists each part but does not seem to have a rebuild "kit" unless I overlooked, anyone else come across this?
 
   / DL100 how hard is rebuilding tilt cylinder?
  • Thread Starter
#2  
DISREGARD hose seep around top ferrule
 
   / DL100 how hard is rebuilding tilt cylinder? #3  
Replace hoses in pairs, saves an extra trip in a couple months.
 
   / DL100 how hard is rebuilding tilt cylinder?
  • Thread Starter
#4  
DMW said:
Replace hoses in pairs, saves an extra trip in a couple months.
Click to expand...
rest of hoses in surprisingly good shape.
the top hose (agco # SL103366) used in only these 2 spots on the DL100, so ordering 2 and will keep 1 spare.
the lower hose (agco # 71515711) used in 2 spots on loader so grabbing 2 of them to keep on hand.
lift cylinders all use same hose in all 4 spots, 71515711

hope its the hose, either that on the welded boss on cylinder leaking but seepage is small enough I cannot pinpoint. but there is moisture on that one hose that transferred to the other hose so...worst case is I end up with a used spare hose and have to get cylinder work done.

edit: corrected hose placement and added lift hose numbers.
 
Last edited:
   / DL100 how hard is rebuilding tilt cylinder?
  • Thread Starter
#5  
of course its the cylinder. leaking at weld. reweld and new seals/etc about 350 $ new SL103202 cylinder is 431.
so ordered new,
 
Last edited:
   / DL100 how hard is rebuilding tilt cylinder?
  • Thread Starter
#6  
guess in few months I'll spend 180 on new barrel ( prior owner had damaged this one, fitting was bent when I bought unit) and a few bucks on seals and rebuild old one to have spare since all 4 my cylinders are same thing.
sadly I just cannot take the risk right now, got large gravel pad to be spread soon for someone. plus multitude of other projects. so any work in week or so will be 0 profit LOL
 
   / DL100 how hard is rebuilding tilt cylinder? #7  
oh man those Mainers know how to ruin everything :)
 
   / DL100 how hard is rebuilding tilt cylinder? #8  
QQ-How many hours on the tractor now?
 
   / DL100 how hard is rebuilding tilt cylinder?
  • Thread Starter
#10  
grr still waiting on parts from AGCO.
another weekend of work shot.
 
You must log in or register to reply here.
 

Footer Links 1

Top