Farmall 50 ?

   / Farmall 50 ? #1  

Lucky Dog

New member
Joined
Jul 10, 2013
Messages
24
Location
Midland, MI
Tractor
Massey Ferguson 65
Any opinions on a Famall 50 with cab and hydrstat transmission?

A 2010 is up for sale near me and Was going to take a look at it.
Any thoughts? Good? Bad?

Thanks.
 
   / Farmall 50 ? #2  
Don’t know if this is the same but I had a 2018 farmall 50a. Was a good hay tractor for the 300 or so hours i owned it. Only issues I really had was a neutral sensor and starter both around 50 hours of me buying.

Worked a 3 bottom plow, disc, and tiller at times too but it spent most of its time with a 489 haybine and 315 baler.
 
   / Farmall 50 ? #3  
Don’t know if this is the same but I had a 2018 farmall 50a. Was a good hay tractor for the 300 or so hours i owned it. Only issues I really had was a neutral sensor and starter both around 50 hours of me buying.

Worked a 3 bottom plow, disc, and tiller at times too but it spent most of its time with a 489 haybine and 315 baler.
Was your neutral switch problem on the H-N-L shifter? If so, how did you fix it? I have a 70A and I’m having an issue with that neutral switch. I have replaced the switch and still having the same problem. Not sure if there is an adjustment that needs to be made or not.
 
   / Farmall 50 ? #4  
Mine was on the same shifter. I did just replace the sensor and everything worked afterwards. No adjustments or anything else. Hope ya get yours figured out
 
 
Top