jvigier
New member
Here we go again, something else not working right with old blue:
Tilled about 1/2 acre then while heading back to the barn left shifter (range) would not come loose or back to neutral.
Tractor drives and the right shifter works just fine. 1,2,3 and r no problem, the tractor moves albeit VERY slowly.
I tried all the old tricks of "stuck in two gears" but that does not seem to apply to my case. With the rear en of the ground both rear wheels move (in opposite directions obviously).
Thoughts?
Tilled about 1/2 acre then while heading back to the barn left shifter (range) would not come loose or back to neutral.
Tractor drives and the right shifter works just fine. 1,2,3 and r no problem, the tractor moves albeit VERY slowly.
I tried all the old tricks of "stuck in two gears" but that does not seem to apply to my case. With the rear en of the ground both rear wheels move (in opposite directions obviously).
Thoughts?
