ferret
New member
Hello everyone....new member here...can anyone tell me why my hydraulics move slow?
Welcome to TBN. 
zman007007
Platinum Member
just curious ,have you checked the level in your reserve tank?
creekbend
Super Star Member
There is a specific Hydraulics forum here on TBN. You may be able to gain some insight by reviewing the posts in that forum. Best wishes. BTW, Welcome aboard.
Depmandog
Elite Member
- Joined
- Nov 26, 2010
- Messages
- 2,551
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
Welcome aboard.
What Creekbend said.
+1
What Creekbend said.
+1
kensnelling
Elite Member
Welcome to TBN from Oklahoma.
Ken
Ken
moored4
Veteran Member
- Joined
- Jan 31, 2011
- Messages
- 2,359
- Tractor
- Kubota l245dt, l3540, 8N
:welcome: to TBN! :thumbsup:
Happy :tractor: ing!
Happy :tractor: ing!
Briana03
Elite Member
Welcome to TBN
I moved your thread to the Ford/New Holland Owning & Operating Forum.
I moved your thread to the Ford/New Holland Owning & Operating Forum.
Hooked_on_HP
Veteran Member
One of the reasons is that the hyd pump only puts out about 4gpm. Part of the problem could also be because of the way the backhoe is plumbed into the hyd system. Have you cleaned the screen (filter) in the hyd sump
Bill
Bill