ford 1600

[bassman7225]

can anybody tell me where to find information on adding a hyraulic remote to a ford 1600? I am putting a 60" front mount snowblower on and need to add hydraulic controls for the lift and chute turn. Any info would be greatly appreciated.

 

[J_J]

Here is some tractor data for you.

Fight now, this is what you have.

Hydraulics:
Capacity: 2.6 gal [9.8 L]
Pressure: 1421 psi [98.0 bar]
Total flow: 4.2 gpm [15.9 lpm]

TractorData.com Ford 1600 tractor information


If all you have now is the pump and 3pt, you could add a two spool valve to your hyd. Run the line from the pump to the IN port of your new valve with PB and the OUT port goes to tank.

You could go with a PTO pump, reservoir and valve .