Good morning!!!!

   / Good morning!!!! #28,491  
weather was downright miserable here today, rainy with a temp around freezing all day. Higher elevations got ice, but no ice here, was just warm enough.
 
   / Good morning!!!! #28,492  
Another cloudy rainy day.
Yeah ... but it ain't in the teens ... yet ... (get ready for tomorrow night :eek:)

Got the recoil spring and the bar and chain oil picked up, other stuff ordered. Also grabbed a scrench ...

Then I hit HFT for diamond splitting wedge, drill-operated drain snake, and some 4 1/2" zip discs ...

After that Ace Hardware for a small tube of stove gasket cement (third time should be a charm) and some AAA batteries.

Got home and got a fire started in the stove @ the shop, cut some of them oak logs into stove lengths, and split some of the maple.

Then came down to the house and brought in a load of oak wood on the two-wheel cart, split that, and then removed the womanly debris that was clogging the shower in the master bedroom ... after some sausage dumplings and sauerkraut.

Now I'm gonna order some odds and ends for the splitter build from Surplus Center, grab a shower, and then head up to the shop.

On tonight's menu are replacing the recoil spring in the chain saw, finishing up the backstop for the pallet forks, cutting a wedge for the splitter out of a piece of 1" x 10" x 12" plate, and maybe a little work on the masts for the grapple.
 
   / Good morning!!!! #28,493  
Coldest air of this season heading for SE next week may see low single digits in my neck of woods Wednesday night. But never fear warm up begins in earnest by end of weekend. With no snow in the offing tractor is really getting bored and so am I for that matter
 
   / Good morning!!!! #28,494  
Yeah ... but it ain't in the teens ... yet ... (get ready for tomorrow night :eek:)

Got the recoil spring and the bar and chain oil picked up, other stuff ordered. Also grabbed a scrench ...

Then I hit HFT for diamond splitting wedge, drill-operated drain snake, and some 4 1/2" zip discs ...

After that Ace Hardware for a small tube of stove gasket cement (third time should be a charm) and some AAA batteries.

Got home and got a fire started in the stove @ the shop, cut some of them oak logs into stove lengths, and split some of the maple.

Then came down to the house and brought in a load of oak wood on the two-wheel cart, split that, and then removed the womanly debris that was clogging the shower in the master bedroom ... after some sausage dumplings and sauerkraut.

Now I'm gonna order some odds and ends for the splitter build from Surplus Center, grab a shower, and then head up to the shop.

On tonight's menu are replacing the recoil spring in the chain saw, finishing up the backstop for the pallet forks, cutting a wedge for the splitter out of a piece of 1" x 10" x 12" plate, and maybe a little work on the masts for the grapple.

Yep, Monday's supposed to be a humdinger. Better get your gas valve.....You could of made one by now.
 
   / Good morning!!!! #28,495  
Yep, Monday's supposed to be a humdinger. Better get your gas valve.....You could of made one by now.
lol ...

Went over to a TBN member's for New Years Eve ... found out he scored a Grizzly lathe/mini-mill ...

He's been holdin' out on me ... ;)

... a "friend" in need ... :rolleyes:

:laughing:
 
   / Good morning!!!! #28,496  
lol ...

Went over to Pineridge's for New Years Eve ... found out he scored a Grizzly lathe/mini-mill ...

He's been holdin' out on me ... ;)

... a "friend" in need ... :laughing:

Well? With a couple of dohickeys you should have one in notime.:thumbsup:
 
   / Good morning!!!! #28,497  
12F & snowing since ~7 pm. Had sun this morning, topped out at 19F early this afternoon and backslid the rest of the day.

NWS forecast is 4"-8". Weather Channel 8"-12". Both agree this will turn to rain mid day tomorrow.

Be careful out there.
 
   / Good morning!!!! #28,499  
Well boys, I reckon I was born on a nasty, wet, rainy day like today, me birthday. Oh, by the way, this is a news fact: Gubmint is going belly up end of this month, not nary a dime left to pay anything. I know this because I'm due to start getting me first gubmint check next month.
 
   / Good morning!!!! #28,500  
Well boys, I reckon I was born on a nasty, wet, rainy day like today, me birthday. Oh, by the way, this is a news fact: Gubmint is going belly up end of this month, not nary a dime left to pay anything. I know this because I'm due to start getting me first gubmint check next month.

Happy Birthday!
 

Tractor & Equipment Auctions

2014 Ford Escape SUV (A38155)
2014 Ford Escape...
2007 FREIGHTLINER M2 106 26FT MOVING BOX TRUCK (A37752)
2007 FREIGHTLINER...
100, 38 SUPER RELOADS (A35719)
100, 38 SUPER...
2015 Freightliner Cascadia 113 T/A Day Cab Truck Tractor Wetkit (A39232)
2015 Freightliner...
Vigoro Spreader (A40010)
Vigoro Spreader...
TASCO9 37ZB 37ZBC SPOTTING SCOPE WITH TRIPOD (A35719)
TASCO9 37ZB 37ZBC...
 
Top