Mowing has this ever happened to anyone (broken deck wheel)
- Thread starter amg280
- Start date
- Views: 2072
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
It happened on ours last year, but we are pretty rough on our mower with my wife frequently forgetting to raise the deck. My son welded it back on; better than new.
I suspect a bad weld as we never had any problems with our BX2200 and I was rougher on it than my wife is on our 2660 and the 2200 is still trouble free.
I suspect a bad weld as we never had any problems with our BX2200 and I was rougher on it than my wife is on our 2660 and the 2200 is still trouble free.
OP
amg280
Silver Member
Thanks guys! Ill clean it up tonight, straighten it, and put a nice weld down. Im glad I still got some Kubota orange paint left :thumbsup:
5030
Rest in Peace
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
I didn't even bother painting mine, it will just make the rest of the deck look bad/worse.
Yep........
I took one off my M60 Tank early this summer and haven't replaced it as of yet. Cuts fine without. I need new gage wheels anyway. They wobble around on the axles like a drunken sailor between bars......
OP
amg280
Silver Member
What type of welder did he use? I have a mid grade Hobart Mig with gas....I know it works great for exhaust work.
5030
Rest in Peace
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
My Hobart 210 would do it but if you have a 110 volt mid range, I'd go to a SMAW unit with 7018LH rod. Nothing beats a dc stick welder for implement repairs.
aczlan
Good Morning
- Joined
- Mar 7, 2008
- Messages
- 17,540
- Tractor
- Kubota L3830GST, B7500HST, BX2660. Formerly: Case 480F LL, David Brown 880UE
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
I honestly don't know, we have MIG and stick. He is a very good welder; me not so much. I took classes in VoAg MANY years ago and was pretty good then, but now...
