HOME BREW SNOWBLOWER MOUNT-DRIVE

[pgondos]

I need some info on how to mount a snow blower to my 2004 Murray Wide Body with a 40"cut I'm thinking of using a used auger from a 2-stage reject with a blown engine . Thanks.

pgondos

 

[skyhook]

Being somewhat disabled and not being able to turn my head around 180 degrees, I hated the thought of a new rear three point snowblower. I was not looking forward to weekly visits to my Chiropractor. I mounted a SPEECO Category 1 Quick Hitch in the bucket of the front loader, installed a hydraulic reservoir in front of the radiator, a hydraulic motor drive for the blower, and a PTO mounted hydraulic pump. I can blow snow looking forward and have height control using the loader controls. As it is only September 2010, I wont be able to test it until December. Requests for pictures should be sent to vayidaho@gmail.com. Will respond when tested and approved. Blowing snow in the panhandle of Idaho south of SandPoint, north of Spirit Lake. Tom

Why do we have to send you an email for pictures.?