TvJab
New member
Just a quick video of my massey ferguson gc1705 breaking down a wooden garden planter. Filmed with a gopro session. 
:thumbsup::cool2::dance1:
:thumbsup::cool2::dance1:Just a video of my Massey breaking down a planter
- Thread starter TvJab
- Start date
- Views: 1366
Citydude
Super Member
Breaking down planters today, pushing over trees tomorrow.... 
WranglerX
Super Member
You might want to consider moving your stop/turn/emergency tail lamp from out side of ROPS to insides... I can guarantee you that a replacement lamp fixture is $127... Just unplug and swap them side to side and remount on inside...
Dale
Dale
sevenvalleys
Member
- Joined
- May 18, 2018
- Messages
- 45
- Tractor
- 2018 Massey Ferguson GC1705
I need to switch mine on my 1705 soon . Thanks for the reminder.
John
WranglerX
Super Member
Figure on using a couple of washers between lamp holders and ROPS bar so you don't pinch wires and get some zip ties to hold wires to ROPS bar as its tough to get wires down insides of ROPS without drilling more holes....
Apparently who ever designed system does not know about trees...
Dale
OP
TvJab
New member
That's a great idea, I am going to do that today :thumbsup::cool2:
mapper
Veteran Member
Moved mine after the first trip mowing near the trees along my driveway. They would no longer exist if I hadn't.
OP
TvJab
New member
I just followed your advice and moved the lights. I opted to drill new holes instead of using zip ties so it has a clean finished look. Thanks for the advice.:thumbsup:
Last edited:
OP
TvJab
New member
update I just ordered these to plug the factory holes on the original sides
https://www.ebay.com/itm/125-Pc-Rubber-Grommet-Firewall-Wire-Gasket-Solid-Hole-Plug-Assortment-Set/331302514697?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
