Leak from 2004 Jinma 284 OE loader joy stick box

   / Leak from 2004 Jinma 284 OE loader joy stick box #1  

nepa

Silver Member
Joined
May 31, 2013
Messages
125
Location
Forest City, PA
Tractor
Mitsubishi 180D, Jinma 284 sold, Kubota BX2660, IH Cub, Case 580CK, Minneapolis Moline 4 Star (sold), TYM 574, Furukawa FX-040
Just a simple problem, but I just thought that I would ask here before acting and then perhaps have to do it again. My OE loader joystick controller box has a leak from where the front most hydraulic line enter the box. I tried tightening it down but it still leaks. The seems to be a rubber washer under each of the lines going into the box and this one appears deformed. Is just replacing the washer enough? It does not seem to be on the parts list. Has anyone fixed this another way? Thanks.
 
   / Leak from 2004 Jinma 284 OE loader joy stick box #2  
Have a Jinma 284 but with a updated valve system but it sounds like it needs a compression washer. These are plastic covered washers. You will have to measure the size of the washer (internal) and order it from a dealer.
 
   / Leak from 2004 Jinma 284 OE loader joy stick box #3  
Tommy at Affordable tractor supply probably has the sealing washers you seek...
 
   / Leak from 2004 Jinma 284 OE loader joy stick box
  • Thread Starter
#4  
I brought the leaky washer to NAPA who sold me a oil drain plug washer part # NOE704-1214 which was a perfect fit and solved the problem. I thought that $4.99 was pricey for a washer, but at least I save on the leaking oil.
 

Tractor & Equipment Auctions

CULVERTS (A36702)
CULVERTS (A36702)
2022 Great Plains Turbo Max (A35780)
2022 Great Plains...
Unused Fork Extensions. (A35431)
Unused Fork...
2004 John Deere 9986 Cotton Picker (A35780)
2004 John Deere...
Unused Sickle Mower Attachment, (A35431)
Unused Sickle...
2018 Broce BW260 Ride-On Towable 3 Wheel Sweeper (A35915)
2018 Broce BW260...
 
Top