Forks Looking for Combination Pallet Fork for 3PH & FEL

[4570Man]

Here are a couple pictures of the mast I have.







I have came up with a far easier and simpler solution. Do the heavy lifting on concrete and use one of the 3 forklifts.



If that isn't possible I have more equipment in the arsenal.

 

[skyhook]

Nice, I like that army wrecker.:thumbsup:

 

[Tractor Seabee]

If I did it I would want to hook it up on the backhoe subframe to reduce the risk of busting something. The problem is I can't figure out how to get it hooked up without using another tractor to lift it up. I also thought about putting it on the loader and resting the mast on the ground, but I was afraid it would still put too much pressure on the loader.

4570, that is the reason I am looking at putting a mast on the front. The QH for a front blade is frame mounted and the unit has a vertical lift cylinder to make a QH functional.

Ron

 

[4570Man]

Nice, I like that army wrecker.:thumbsup:

I want to enter it in the "stock" truck pull. The problem is I couldn't ever come half way close to meeting the maximum weight. I wonder if I could pull anyway and not be eligible for any price.

 

[Xfaxman]

I am looking for a pallet fork that can be used on the 3PH and the FEL. Is there such an attachment?

There have been several threads in the past where guys did that, here are two: http://www.tractorbynet.com/forums/customization/286916-combination-ssqa-pallet-fork-qh.html

http://www.tractorbynet.com/forums/build-yourself/346668-like-add-3ph-brackets-my.html