LOOKING TO ADD A TEMP GAUGE TO A 2210BD--- any suggestions on a prior thread or

[RUMBLON]

OK, gauge is installed and after starting it a few times and topping off the oil it seems fine. Not out of the shop yet but an oil change and revving it a bit and Im at 50 PSI.

Now, time to hook the backlit lite from the gauge to the headlights.

 

[winston1]

A sucess story. :thumbsup:

 

[RUMBLON]

Winston, tomorrow is my test drive for everything including the new 4x4 rebuild front end. I also did the gauge light into the head lights and a rear work light on a switch in case I need to be out at night.

 

[bmaverick]

Winston, tomorrow is my test drive for everything including the new 4x4 rebuild front end. I also did the gauge light into the head lights and a rear work light on a switch in case I need to be out at night.

Looking for some shortly.