Lose grease zerks on bl-200 loader

   / Lose grease zerks on bl-200 loader #1  

North to Alaska

Silver Member
Joined
Apr 16, 2018
Messages
241
Location
Talkeetna, AK
Tractor
Branson 4520r
Curious if anyone else had this?
Did the first time grease of my 4520r with bl-200 fel. Several of the zerks on the fel were not screwed in tight.

You may want to check them
 
   / Lose grease zerks on bl-200 loader #2  
I had the same thing on my BL150. One was missing. But after tightening I haven't had anymore problems.
 
   / Lose grease zerks on bl-200 loader #3  
Curious if anyone else had this?
Did the first time grease of my 4520r with bl-200 fel. Several of the zerks on the fel were not screwed in tight.

You may want to check them
Yes, us here we go true them one by one on the PDI, my guys in the garage have seen a couple of those.
 
   / Lose grease zerks on bl-200 loader #4  
Same, 4820 BL200, all the zerks were barely hand tightened. I discovered when one clogged. Tried to remove it and it felt like there was no grab from the socket drive, so was thinking somehow I had too big or small a socket. Wrong. Was just incredibly loose. Checked another, same thing.
 
 
Top