OP
rasorbackq
Platinum Member
Whats the welded nut for on the chute back near bottom. Same as on the yet Cat painted one?
Luck now snowblower shoot cylinder question.
- Thread starter rasorbackq
- Start date
- Views: 2888
RjCorazza
Elite Member
That nut caused me concern when I converted from the hand crank (OEM) to hydraulic (also OEM). The nut wasn't used when I got the blower, so I just ignored it for the hydraulic upgrade. I have no idea what its purpose is.
OP
rasorbackq
Platinum Member
So I found a used cylinder . Hooked it up but the chute will need to be adjusted to centre for the cylinder travel. Will post pics of the final project
OP
rasorbackq
Platinum Member
Final pics . Might get a few new hoses and elbows for next season.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Mine has the 'nut' as well and I have no idea what it's for either. Yours needs a nice '5 gallon finish' I'd say. I would, most certainly replace the hoses. Yours are pretty ratty and I had one of mine expire last year so I trundled down to Tractor Supply and bought 2 new ones.
