RichNJKubota
Gold Member
Does anyone know where is the best place to get a manual for a NH 320 baler?
Rich
Rich
Manual for NH 320 baler
- Thread starter RichNJKubota
- Start date
- Views: 1143
markct
Platinum Member
- Joined
- Aug 9, 2002
- Messages
- 893
- Location
- northfield connecticut
- Tractor
- gradall g3r excavator, kawasaki mule 2500,ford 8000,and a 1936 caterpillar road grader
NH would be my guess, but i will say this much about that baler, a friend has one and has been told by many people that they are a great baler but DO NOT RUN IT MORE THAN 540 RPM. it will shake itself to bits in no time, it is a very high capacity which means it is a high stroke per minute plunger so if it is overspeeded bad things happen and parts fly.
RichZ
Veteran Member
- Joined
- Apr 4, 2001
- Messages
- 1,873
- Tractor
- Kubota 4630 with cab and loader
You can order the manual from New Holland.
rambler
Veteran Member
- Joined
- Jul 6, 2003
- Messages
- 2,010
- Location
- MN
- Tractor
- Ford 960, 7700, TW20, 1720; IHC H, 300; Ollie S77
NH has a 1-800 number - sorry I don't know it - which is best for this.
Their web site also has order info - tho I heard it was having difficulty a few months ago....
Or a dealer - but I've had bad experience with my dealer & manuals.
Still, best 3 places for Ford / NH manuals.
--->Paul
Their web site also has order info - tho I heard it was having difficulty a few months ago....
Or a dealer - but I've had bad experience with my dealer & manuals.
Still, best 3 places for Ford / NH manuals.
--->Paul
OP
RichNJKubota
Gold Member
Thanks for your suggestions. Called the local dealer and he did not call back for a couple of days. In the meantime I called a dealer in PA and they sent the manual out.