MF 135 PTO seal variants

   / MF 135 PTO seal variants #1  

The kid

Elite Member
Joined
Apr 25, 2012
Messages
3,888
Location
Middle Tennessee
Tractor
1965 135 gasser, 1967 135 diesel
Not all PTO seals created equally

I just replaced my seals in my PTO retainer and it appears not all seal listed under the part# 1860325M1 are created equally. The one that came out, I beleive had a rubber and leather seal. I've been advised a seal with leather needs to be soaked in oil overnight before installed. The new one I put on looked cheaply made and frankly I don't trust it. So I ordered one like the one that came out. Anyone else see this wide variety of inner PTO seals?
 
   / MF 135 PTO seal variants #2  
G,Day Mr kid .
The Original seal has the leather wiper on the outside to keep the dust etc away from the actual oil seal inside,it would do no harm to soak the seal in oil before fitting and once fitted fill the void area BETWEEN the leather and the rubber this will keep the leather lubricated long enough to see You out :dance1:eek:nly joking ,if you have got the new dodgy seal in leave it there and when it fails replace it with the new one maybe it wont leak !!Thats it for now .
Regards .
Hutch .

P.s. I have some macadamia cheesecake for sweets tonight come along and try some .
 
   / MF 135 PTO seal variants
  • Thread Starter
#3  
shona13 said:
G,Day Mr kid .
The Original seal has the leather wiper on the outside to keep the dust etc away from the actual oil seal inside,it would do no harm to soak the seal in oil before fitting and once fitted fill the void area BETWEEN the leather and the rubber this will keep the leather lubricated long enough to see You out :dance1:eek:nly joking ,if you have got the new dodgy seal in leave it there and when it fails replace it with the new one maybe it wont leak !!Thats it for now .
Regards .
Hutch .

P.s. I have some macadamia cheesecake for sweets tonight come along and try some .

Hello Hutch. I did buy another seal with a leather wiper in it. The one I bought or was sold as replacement i might have put in backwards. I asked to people I bought it from and simply told me to put it in like the old one. Duhhh. Anyways.. Waiting for some good weather to paint the body with Flint Grey Metallic.

I can't eat nuts anymore due to medical reasons, but the cheesecake, yes indeed.

I've got a few ideas I'm going to try on the upholstery of my new seat. I have some Naugahyde in grey I'm going to recover my new spring seat and paint the body red to appear to be factory.
 

Tractor & Equipment Auctions

2006 International 4300 24ft Box Truck (A46683)
2006 International...
2021 Caterpillar 289D3 Two Speed Compact Track Loader Skid Steer (A46683)
2021 Caterpillar...
2024 Mini Stand-On Track Loader Skid Steer (A46683)
2024 Mini Stand-On...
Pequea TS-24 Double Rotary Rake (A49251)
Pequea TS-24...
2025 JMR 40in Single Cylinder Grapple Skid Steer Attachment (A49346)
2025 JMR 40in...
H&S Silage Wagon (A49251)
H&S Silage Wagon...
 
Top