OP
Brokenbone
New member
Well the new part or parts I should say. 2 relays 1blue 1 black, a new solenoid,and new display unit and it still wont start.
My DK50SE HST wont Start
- Thread starter Brokenbone
- Start date
- Views: 3824
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,663
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
Does it do anything when you turn the key? Crank over? Loud fuel stop solenoid click?
Which solenoid did they send you? Stop or starter?
All this time passed with no tractor use? When did the parts arrive?
Which solenoid did they send you? Stop or starter?
All this time passed with no tractor use? When did the parts arrive?
ritcheyvs
Veteran Member
Referring to post #3, if your fuses are good, sounds like the display unit isn't working right.
Coyote machine
Super Member
- Joined
- May 4, 2009
- Messages
- 7,663
- Location
- Southern VT
- Tractor
- 22 SANY SY 50U, '10 Kioti DK 40se/hst KL-401 FEL, loaded tires, KB-2485 bhoe, Tuffline TB160 BB, Woods QA forks, MIE Hydraulic bhoe thumb & ripper tooth, Igland 4001 winch, & GR-20 Log Grapple. Woods BBX72" Brush Mower. Diamondplate aluminum canopy
Hello richeyvs. See above quote, especially red text.
See above ^^^^^^^^
ritcheyvs
Veteran Member
That's what happens when I'm in too much of a hurry. IMO, time for parts swapping is over and it's time for a systematic approach: (1) make sure the "pull" coil really works using a jumper direct to the battery and then (2) find out why the "pull" pulse isn't getting to the solenoid. And that requires someone that can use a voltmeter and read a schematic. Time for thr dealer to earn his warranty money?
Last edited:
