need info on choosing a rototiller

[botakix]

hey guys, a friend of mine is thinking of buying a tractor mounted rototiller for his tractor and is needing some info before buying one. He has a older 601 ford tractor. i think its about 35 or 40 horse. What are some of the features to look for in a rototiller and which brand seems to give you the most bang for the buck.

 

[sweettractors]

We have the Geardrive Hawkline 5 ft for $1595 and the 6 ft for $1695. 6 tines per rotor and slip clutch PTO is a must--Our 5 ft weighs 700 and the 6 ft weighs 800. These tillers are bullitproof. Ken Sweet

 

[inveresk]

I have a JD 5' tiller that I bought used. It doesn't quite cover my tire width but is offset, so I don't have to ride with one wheel on unbroken ground and one on tilled ground. Maybe all small tillers are offset - I don't know enough about them. It's just something to be aware of.

I agree a slip clutch is essential.

 

[CompactTractorFan]

LandPride has some nice reverse tine tillers. :thumbsup:

 

[sweettractors]

We are selling the Phoenix/Kioti/First Choice/Sicma Reverse rotation tillers for anyone interested, give us a call for prices. Ken Sweet

 

[CompactTractorFan]

We are selling the Phoenix/Kioti/First Choice/Sicma Reverse rotation tillers for anyone interested, give us a call for prices. Ken Sweet

Interesting. I thought LandPride was the only one making them...

 

[Travis_R]

When I get ready to buy a tiller, I'm certain it will be a King Kutter. They are U.S. made. King Kutter Incorporated

Travis R

 

[sweettractors]

This summer, I would like to visit the USA factory that makes the KK gearboxes. Anyone know where it is located? Ken Sweet

 

[Haywire]

After looking around, I have come to the determination that I'll be buying one of those 48" Hawkline's from Ken when I go to get a tiller (probably this fall). He's asking the same for those Hawkline gear drives as Tractor Supply is for their 48" Countyline chain drives. Landpride wanted $200 more than that for a 42" chain drive tiller.

Ian

 

[dex3361]

I have a 6 foot King Kutter tiller and it does a great job. I would not get a reverse rotation tiller because it will suck the tiler into the ground if it hits a rock or a root instead of climbing over it.