So while doing some inspections today I noticed my fuel line from the tank was rubbing on the frame and had already removed quite a bit of rubber. I fabricated a metal shield out of air duct sheet metal and zipped tied it on. Think it should work. Poor design by Kioti.
NX6010 Potential Fuel Line failure
- Thread starter cutthroat
- Start date
- Views: 1526
IslandTractor
Super Star Member
- Joined
- Sep 15, 2005
- Messages
- 16,647
- Location
- Prudence Island, RI
- Tractor
- 2007 Kioti DK40se HST, Woods BH
Nice "repair". Agree that is either bad design or someone put yours together improperly. Surprised the Eric or other high hour NX owners haven't noticed the same thing.
mguitas
Super Member
- Joined
- Aug 22, 2011
- Messages
- 8,080
- Location
- Schuylkill County Pennsylvania
- Tractor
- Massey Ferguson 1423 Hydrostat
The material they use for hydraulic hoses, might have work too.
holeycow
Gold Member
heater hose works well for those situations. It looks like an assembly issue rather than a design issue. One thing to do on any new machine is to look carefully for those exact things. Minor. Looks like you caught it in time.
MinnesotaEric
Super Member
If it is the line that runs across the top of the transmission, I already rerouted it when I was installing my third function at the seven hour mark back in July of 2014.