Oil Presusre and Water Temperature Gauge Add-On

[jlgurr]

Here is the water temp and oil pressure lines connected to the engine block.




Sent from my iPhone 2.0 using TractorByNet

 

[ray66v]

Here is the water temp and oil pressure lines connected to the engine block.



View attachment 463597

Sent from my iPhone 2.0 using TractorByNet

So, which is which?

 

[pmsmechanic]

So, which is which?

The oil pressure is the top line and the water temperature is the bottom line with the wire protector spiraled around it. The picture is sideways.

 

[jlgurr]

Sorry about that. Next time I'm on the computer I'll rotate it.

<CGImageProvider 0x15e014a0>

 

[ray66v]

Sorry about that. Next time I'm on the computer I'll rotate it.

<CGImageProvider 0x15e014a0>

No problem, thanks for posting.

 

[jlgurr]

I've decided against mounting the gauges on hood of the tractor... Once they are finally mounted in the "cockpit" I'll post them too, right side up.

Jeff

 

[pmsmechanic]

Sorry about that. Next time I'm on the computer I'll rotate it.

<CGImageProvider 0x15e014a0>

How do you rotate pictures? I have a few that need it. Thanks

 

[jlgurr]

How do you rotate pictures? I have a few that need it. Thanks

The only way I know is to rotate on my pc then re-upload to my message. I have not found a way to do it within TBN.

Sent from my iPhone 2.0 using TractorByNet

 

[jlgurr]

Finally finished the installation today. I'll get a night photo another time.



50 PSI Oil and 165°F water no load. Matches about the 1/4 mark on the factory gauge.

 

[davrow]

They look great.

Aren't you worried about hitting them with your knees?