Forks Pallet Forks - 'over-engineer'?

   / Pallet Forks - 'over-engineer'? #31  
Ted from Everything Attachments says he hates floating forks, I think because you can稚 point them down? I致e used my non-floating forks in ways you shouldn稚 like digging out a rock so I don稚 think I壇 like floating either.
I prefer floating forks. If you need to point them down or apply down pressure, use a short piece of chain.

The 48 inch floating block forks:

P8110007.JPG
P8110002.JPG


The 42 inch heavy duty floating forks with one chained to show the difference:

P6190009.JPG
P6190002.JPG
 
   / Pallet Forks - 'over-engineer'? #32  
Floating forks would never do for me...

SR
 
   / Pallet Forks - 'over-engineer'? #33  
Floating forks would never do for me...

SR

Me neither. They have an obvious disadvantage and I’m not sure what the advantage is.
 
   / Pallet Forks - 'over-engineer'?
  • Thread Starter
#34  
While we are on the subject, what are the thoughts about forks that clamp onto the bucket?
 
   / Pallet Forks - 'over-engineer'? #35  
While we are on the subject, what are the thoughts about forks that clamp onto the bucket?

They suck. They cost a considerable amount of lift capacity and visibility is awful. They’ve been known to bend buckets.
 
   / Pallet Forks - 'over-engineer'? #36  
They suck. They cost a considerable amount of lift capacity and visibility is awful. They’ve been known to bend buckets.
Yup! They are cheap, but that's about it.
 
 

Tractor & Equipment Auctions

2016 Club Car Carryall 1500 4x4 Utility Cart (A55758)
2016 Club Car...
2006 Ford F-750 Stellar 6620 6,000 LB 3 Ton Crane Mechanics Truck (A55852)
2006 Ford F-750...
2025 Mahindra 6075 4WD Cab Tractor - 71 HP, Loader Ready, Ag Tires (A55315)
2025 Mahindra 6075...
UNUSED FUTURE 40" HYD TILT MINI EXCAVATOR BUCKET (A57193)
UNUSED FUTURE 40"...
(2) 5' FOLD UP TRAILER RAMPS (A57192)
(2) 5' FOLD UP...
1997 John Deere 8400 (A53317)
1997 John Deere...
 
Top