Forks Pallet Forks - 'over-engineer'?

   / Pallet Forks - 'over-engineer'? #31  
Ted from Everything Attachments says he hates floating forks, I think because you can稚 point them down? I致e used my non-floating forks in ways you shouldn稚 like digging out a rock so I don稚 think I壇 like floating either.
I prefer floating forks. If you need to point them down or apply down pressure, use a short piece of chain.

The 48 inch floating block forks:

P8110007.JPG
P8110002.JPG


The 42 inch heavy duty floating forks with one chained to show the difference:

P6190009.JPG
P6190002.JPG
 
   / Pallet Forks - 'over-engineer'? #32  
Floating forks would never do for me...

SR
 
   / Pallet Forks - 'over-engineer'? #33  
Floating forks would never do for me...

SR

Me neither. They have an obvious disadvantage and I’m not sure what the advantage is.
 
   / Pallet Forks - 'over-engineer'?
  • Thread Starter
#34  
While we are on the subject, what are the thoughts about forks that clamp onto the bucket?
 
   / Pallet Forks - 'over-engineer'? #35  
While we are on the subject, what are the thoughts about forks that clamp onto the bucket?

They suck. They cost a considerable amount of lift capacity and visibility is awful. They’ve been known to bend buckets.
 
   / Pallet Forks - 'over-engineer'? #36  
They suck. They cost a considerable amount of lift capacity and visibility is awful. They’ve been known to bend buckets.
Yup! They are cheap, but that's about it.
 
 

Tractor & Equipment Auctions

UNUSED GRASSROOTS IMPLEMENT 6' BOX BLADE (A57192)
UNUSED GRASSROOTS...
UNUSED RAYTREE RMRB72 72" HYD POWER RAKE BUCKET (A57193)
UNUSED RAYTREE...
2014 Ford Fusion Sedan (A56859)
2014 Ford Fusion...
J BAR SD 5 5' ROTARY MOWER (A57192)
J BAR SD 5 5'...
Plasmarc PM150 Plasma Cutter (A55851)
Plasmarc PM150...
UNUSED PABREAK AR650 HYD AUGER (A57193)
UNUSED PABREAK...
 
Top