Snow Pt snow plow

Schultz · Feb 24, 2003

If anyone is interested I'm willing to redesign the PT snowplow using ProE (3d cad) to be a V-plow like the boss plow if some one can provide the pictures and some dimensions of the current plows. My idea is to start with a PT plow or maybe Han's cheap snowplow, cut it in the center and add the needed components. When done I'd post the drawings, BOM, estimated cost, and the group could in a sense conduct the design review on it.
Tim

johara1 · Feb 24, 2003

take a look at the one steiner makes it very nice.it angle right and left, and scoop.

ernemats · Feb 24, 2003

Welcome aboard johara1, I think you will find a lot of good information on this site.

bubenberg · Feb 25, 2003

great idea Schultzi! if everything goes right with your design maybe we can make it so it can be both "Straight, V-plow and Angled". that would be one of my dreams come through. /forums/images/graemlins/cool.gif

i see myself with a mini articulated (Boss)plow going down the road /forums/images/graemlins/grin.gifBoss plow

MossRoad · Feb 25, 2003

Here's a link to the Steiner V-Plow that you mentioned.

Schultz · Feb 25, 2003

Yup Hans it would work like the Boss plows...straight, > , and <.

Thanks for the links. I've started using some of the dimensions off the Steiner Link. Right now, I have to figure out what to use for the hinge, I haven’t found an off-the-shelf steel pipe thick enough yet. I was thinking .5"ID and .75"OD, maybe an 1/8" bigger. I like how Steiner angled the ends of their plow out, it resembles one of the big boys you see on an Oshkosh truck up north.

johara1 · Feb 25, 2003

if you need a heavy continuous hinge,i buy it from industrial hardware in akron,ohio.it comes in alum.,s.s.and unplated steel.order by thickness up to .187,open width up to8",pin dia. to.500 and knuckle length of 2".they come in 72" and 96"length.#1-800-682-8900 get a cat. lot of good stuff /forums/images/graemlins/smile.gif /forums/images/graemlins/smile.gif

Schultz · Feb 26, 2003

I ended up finding one from my favorite catalog: McMaster Carr. It was availible in plan steel, 24" sections, .5" pin diameter, and .180" wall thickness
Thanks

Schultz · Feb 26, 2003

Here is a start on the plow itself. Since I don't have one, I made many guesses. I'll probably continue making the plow as it's own assembly, but I still want to make a PT version. Therefore, if anyone can post some close up pics of the backside of their plow that would be great. Right now, I haven't designed that part yet.

So far the specs are:
40deg back angle
30 forward angle
Straight, and left or right 30 deg
Tim