rear remote issues

Goat65 · Jun 13, 2015

I worked the tractor the past couple days and setting the top link with boxblade on ground worked much better. Thanks for all your help.

MtnViewRanch · Jun 13, 2015

Goat65 said:
I worked the tractor the past couple days and setting the top link with boxblade on ground worked much better. Thanks for all your help.

If you get some .030 flow restrictors, your sloppy cylinder syndrome will go away. You can get them that fit right between the hose and your male coupler. Makes life much easier. :thumbsup:

Goat65 · Jun 14, 2015

Cool thanks. I am running 1/4" hoses and I was hoping they would help.

MtnViewRanch · Jun 15, 2015

Goat65 said:
Cool thanks. I am running 1/4" hoses and I was hoping they would help.

A lot of people think so, but not really, the hole through the port into the cylinder may already be that small. You really need to go with the .030 restrictors.

You will see a HUGE difference with how things operate. You can get them from me if you don't want to shop around.