Grading Soft blade edge for BX2763 plow?

   / Soft blade edge for BX2763 plow? #1  

Jabroni

Silver Member
Joined
May 31, 2007
Messages
165
Location
Central MA
Tractor
Kubota BX24
I need to plow right down to the driveway surface in order to get up my steep driveway. I'm looking for a soft blade edge that will fit my BX2763 plow so I can literally squeegee the snow off my driveway. A seach here turned up something called a B2766 Kubota Edge, but I'm not having any luck finding much info on it, plus it was priced at over $150. Anyone have experience with one or using an equivilant?
 
   / Soft blade edge for BX2763 plow? #3  
I have that plow with the squeegee edge and it works great. I have some coble stones that it goes over nicely and grass when it is frozen. I got mine at Toreku in Ayer.
Good luck
Bob Cramer
 
   / Soft blade edge for BX2763 plow?
  • Thread Starter
#4  
I am assuming by 'plow' you mean rear blade...

This is a front blade.


I have that plow with the squeegee edge and it works great. I have some coble stones that it goes over nicely and grass when it is frozen. I got mine at Toreku in Ayer.
Good luck
Bob Cramer

Ayer's a hike for me, but I'll give them a call. Thanks.
 
   / Soft blade edge for BX2763 plow? #5  
Jabroni,
I in fact do and have had the rubber squeegee on My BX2763 from the day I bought it.

It is pretty heavy duty and can be inverted when the edge is worn off. Expensive I know but it bolts right in place of the steel point that comes on the blade.

Good Luck ,
Tom
 
   / Soft blade edge for BX2763 plow? #6  
I have that plow with the squeegee edge and it works great. I have some coble stones that it goes over nicely and grass when it is frozen. I got mine at Toreku in Ayer.
Good luck
Bob Cramer
I have the plow but not the squeegee edge.
 

Tractor & Equipment Auctions

UNUSED JCT 84" HYD DOZER BLADES (A57193)
UNUSED JCT 84" HYD...
UNUSED LANDHERO RIGGING/BINDING (A57193)
UNUSED LANDHERO...
UNUSED SET OF FUTURE 13', 200AMP JUMPER CABLES (A57192)
UNUSED SET OF...
(APPROX. 20) 4' X 8' X 3/8" SHEETING (A52706)
(APPROX. 20) 4' X...
CFG Industrial MX15RX (A56469)
CFG Industrial...
3' X 6' METAL SHOP TABLE W/ VICE (A57192)
3' X 6' METAL SHOP...
 
Top