TC 25D Fuel Filter Assembly

[A72777]

I need to replace the fuel filter assembly on my TC 25D. What is the best way to clamp the hoses running into the assembly to keep from losing fuel while I do the swap out? I was thinking about just doubling the lines back on themselves and taping them rather than attempt to clamp them. Any advice would be appreciated.

 

[RickB]

If you have needle nose Vise-Grips, they work well. Auto parts stores will have fuel line/heater hose clamps. Doubling back and taping should work. You only really need to clamp one line.

 

[A72777]

Thanks Rick!