TG1860 with TG2746 Snowblower

hydrology_joe · Jan 2, 2010

BM64 said:
I just got a TG2746 for my TG1860. How the heck do you get the front of the sub-frame past the exhaust? The sub-frame looks like it's a TG2739A, but it's scratched right past the 7...can't make out the rest. This would appear to be a non-issue with the TG1860G as the exhaust is in a different location. davitk put up some great pics but not the area I'm having trouble with. Can you add any insight?

I didn't have any clearance issues between the "Quick Attach" and the exhaust. I'll try to get some pictures added, but my computer is acting up so I can make any guarantees.

BM64 · Jan 6, 2010

Well, I got the sub-frame and blower hooked up last night. Wheel weights and chains on this afternoon. Just came in from "playin"! I had no trouble blowin through 12" to 18" virgin snow near the edge of driveway. The wet packed snow in the middle was a real bugger, she slipped quite a bit but cleared it eventually. Hope to get a new digital camera this week. When I do I'll put up some pics. Thanks for the help guys!

DGS · Mar 31, 2010

BM64 said:
Well, I got the sub-frame and blower hooked up last night. Wheel weights and chains on this afternoon. Just came in from "playin"! I had no trouble blowin through 12" to 18" virgin snow near the edge of driveway. The wet packed snow in the middle was a real bugger, she slipped quite a bit but cleared it eventually. Hope to get a new digital camera this week. When I do I'll put up some pics. Thanks for the help guys!

My first Kubota was the TG 1860 and it served me very well but I could no longer raise the mower or snowblower it being manual lift, it mowed great and blew snow like there was no tomorrow but after my by-pass surgery that was the end of the line for the poor old girl's stay with me.
I traded her for my BX1830 in 2005 and what a difference it having hydraulic lift and 4wd, no comparision IMHO.
Kubota makes great machines and there are ones for everyone out there
Enjoy yours
Regards
DGS

beaver9meadow · Jan 2, 2016

Hi Guyw I have an older GF1800 with a TG2742 snow blower. Where did you get the TG2742 manual? I need the parts and installation manuals.
I think I'm missing some parts for the power takeoff shaft.

uglyboywith11fingers · Jan 29, 2016

Hey beaver...
you piggy-backed onto a discussion about a TG2746 blower on a TG1860 tractor. This is a belt driven blower.
you seem to need info on a TG2742, probably a different machine.

sorry, I can't help you.
if you still need help, you should start a new thread with the appropriate model numbers to give it some visibility.

Pete