top link lifting force lbs.

[SixHoeBob]

That hydraulic top link you have sells new at $200. A 3" X 12" stroke cylinder for that disc is $120 @ TSC. Sell the top link if you aren't going to use it and buy the cylinder.

BINGO! 10 more worthless points awarded. But is it an 8" stroke cylinder?
What is the length of the clean portion of the chrome rod? While you are at it, is it 3" or 2.5" dia.?

 

[countrybumpkin]

This one would work just fine for you and only 60 bucks.

Hydraulic Cylinders 117-252 Detailed Information

 

[spo307]

Its a 2 x 8 piston, I am going to get a new piston 2 x 10. From tsc or surplus center, the old disks were around 15 to 17 inches the new ones are 20, thanks for the replys

 

[spo307]

I see tsc has tie rod pistons, I usually buy my pistons from surplus, how are tie rod pistons, will it hold up a long time, any draw backs

 

[SixHoeBob]

What is the maximum stroke length the disc was designed to use? If the cylinder has to much stroke, will it bend something on the disc? I would go with 2.5" diameter. The tie rod cylinders have been around forever, and are decent quality

 

[J_J]

my jd kba disk wheel carrier needs a new piston, I have a new top link piston that I can use Surplus Center - 2X11X1.18 CAT I HYD DA TOP LINK CYL
would this lift a kba disk with new 20" disk, and a beefed up frame?
old piston

The cyl you selected

Using 2500 psi

Push Force lbs 7854 lbs
Pull Force lbs 5085 lbs

The other cyl

The 2.5 in, and 1.062 in rod, at 2500 psi,

push 12,272 lbs
pull 10,057 lbs

 

[LD1]

The cyl you selected

Using 2500 psi

Push Force lbs 7854 lbs
Pull Force lbs 952 lbs:confused2::confused2::confused2:

:confused2::confused2::confused2:

 

[beenthere]

LD1
Prolly just a typo.

 

[LD1]

LD1
Prolly just a typo.

I would certainly hope:confused2:

I already had it calculted in the second post of this thread though @ 5100lbs:thumbsup:

 

[J_J]

Fixed it, should have double checked . I thought it looked odd, but calculators don't lie do they.

pull 5085 lbs


rod size 1 & 1.1875 in