YM 1700 hard starting

[normde2001]

Diesel Engine Compression Tester 2 Pc

Has anyone tried this, and/or know if any of these adapters will work on Yanmar?

 

[Jtullis13]

Diesel Engine Compression Tester 2 Pc

Has anyone tried this, and/or know if any of these adapters will work on Yanmar?

I have seen that before, but have never used it or know if it will work on our Yanmars

 

[normde2001]

I have seen that before, but have never used it or know if it will work on our Yanmars

When/if my time comes I will get that, then see about the adapter.

 

[B man]

The that Hoye Tractors out Iowa Park Tx. has uses the clamps that hold the injectors in. I will use wood and solvent to polish the tips and toothpicks to clean the jet(YouTube). Hopefully the UPS guy gets here soon with the injector puller.

 

[California]

Diesel Engine Compression Tester 2 Pc

Has anyone tried this, and/or know if any of these adapters will work on Yanmar?

I think you need a dummy Yanmar injector as an adapter between any gauge kit, and the head.

Hoye sells one that they had to have custom designed, so the adapters in common kits apparently aren't the right ones for our Yanmars.

 

[B man]

Pulled the injectors. The Teflon washers under them are shot, had a heck of a time getting the back cylinder’s seat out so it could be cleaned. They are both clean and functioning well. Now to get the washers so a compression test can be done. I was able to rent the slide hammer from Hoye for $10 for ten days, had them both out in about ten minutes, that thing works like a champ.

 

[clemsonfor]

I may end up going to Iowa Park for work this year. If I do I hape to make a trip to Hoye and Meet Aaron @Hoye Tractor !!! Buy a few small things while I'm out there.

 

[B man]

They have been great to work with. Shipping is a bit high, since I’m only 130 miles from them, but that’s the way it is anymore.

 

[thepumpguysc]

I was working on a machine that I HAD TO get the tool/puller for..
I started out "renting" it for 10.00.. Then I looked at the invoice & shipping..
It was 25.00 to get it, it was gonna be 25.00 to ship it back + the 10.00 rental..
I called them up & told'm to mark that one "SOLD".. Lol
Its a BEEFY tool.. very well made.. even if u had the "plans"/specs, u probably couldn't get one made or that price.??

 

[thepumpguysc]

THAT compression tester is for testing thru the "glow plug" hole..
THIS ONE is for testing thru the injector hole..
Diesel Compression Tester Set
I haven't tried it on a Yanmar tho..
One thing about getting the big kit is, u can always turn around & sell it after your done..