YQM-48 & Over-Running Clutch Question

   / YQM-48 & Over-Running Clutch Question #1  

richriddle

Gold Member
Joined
Feb 6, 2017
Messages
263
Location
Taylorsport, Kentucky
Tractor
Kubota L4330 with LA853 Loader, Yanmar YM276D with YFL1000 Loader, Yanmar YM276D, Yanmar YM147D, Case 1845C
Is it possible to utilize an over-running clutch with the YQM-48 belly mower on the YM147D? Actually, I am wondering if it's needed at all as well. Thank you.
 
   / YQM-48 & Over-Running Clutch Question #2  
That's an American model Yanmar, no? You might already have an over-running clutch.

Unhook the mower and try turning its pto (on the tractor) backward. Or just turn the blade(s) backward if you can. If you hear clicking like a bicycle coasting along, that's the over-running clutch working as it should. This test works on a rear pto and should work on a belly pto as well.
 
   / YQM-48 & Over-Running Clutch Question
  • Thread Starter
#3  
California,

It is an American model. The PTO has no implements on it, so I will attempt to turn it backwards as you recommend. The mower attaches to the rear PTO when installed. Thank you.
 
   / YQM-48 & Over-Running Clutch Question
  • Thread Starter
#5  
Winston1,

Thanks for the link. I didn't realize they provided that information.
 

Tractor & Equipment Auctions

PROTEMP 175,000 BTU HEATER (A52708)
PROTEMP 175,000...
78in Dual Cylinder Brush Grapple Skid Steer Attachment (A56857)
78in Dual Cylinder...
2015 GMC Terrain SUV (A56859)
2015 GMC Terrain...
Electric Diesel Fuel Pump with Hose Reel (A55851)
Electric Diesel...
2017 Cadillac Federal 70IN Limo w 27466 Miles, Premium Federal Coachwork, Luxury Transport (A56435)
2017 Cadillac...
set of 4 wheels and tires 205/75R15 (A56435)
set of 4 wheels...
 
Top