Search results

I removed the top plate previously and it has some surface rust, so it is probably rusted together and not stuck in gear. I will give the diesel a go and see what happens. Thanks.

Not really, that is what I am hoping to fix. There is not much if any fluid in there currently. Would diesel free it up?

I resurrecting a Bull and the tranny is frozen/rusted together. What would be a good method to free this?

Does someone know where (or have a copy of) I can get a service, operators and/or parts manual for a 485 DI?

Update- Called a few well places, hard to get someone to return calls and/or talk to someone. Found one who was very helpful and is now in my phone. In short, something like an Easy Start has not proven well from their experiences and they do not recommend one. He also said I was measuring the...

The PTO generators I a looking have have a THD of less than 5%, the IMD with AVR is <1%, this is from IMD when I spoke to them. It seems the ones under 15/16KW have lower THD than the larger ones, at least the ones I have looked at. Point is, I am good with that and the electronics should be...

I posted a thread in Rural asking about a soft start on a well pump. In short, there was not a good solution that I was comfortable with, so I will leave it as is. I do have an Easy start for the AC, the two of these are the largest consumers. On the pump, inrush is 42Amps @ 240, which is...

Thank you for the replies. I have not bought one yet, but I’m getting very close to pulling the trigger. I like the Baumalight, but the warning may be a dealbreaker. Here is what the response was from them, it could be a CYA statement or some deep electrical reason as mentioned above. ”The...

Correct, a 2HP or larger motor with a PTO gen.

I was looking at Baumalight's site at the TX12 specifically, and it had a warning in the manual to not use for over 2HP motors or the generator could be damaged. I emailed Baumalight and they confirmed, none of the TX series are rated for more than 2HP regardless of watts, and they recommend the...

Thanks for the additional info. Based on the info posted, I don't think I will do the well pump easy start. The ROI is much longer with it, I was hoping for a few hundred dollar unit like the Micro-Air. @ponytug I have researched solar, would love to do that but my power company is not solar...

Thanks Peter, good info. I have a 2500gal cistern too that has a transfer pump, it's 25A inrush. I am unsure how often my well pump runs, but it's somewhere between 1-2 time per week. I can manage the well pump load by turning off the breaker, but the transfer pump is critical since my pressure...

Thanks for the replies. WRT the 4KW generator, how are you coming up to that? Unless I am doing math incorrectly, 240V * 42A = 10,000W, which is a 10KW generator to start the pump.

I am looking for a whole house generator but want to get the sizing right. My well has a 3HP pump on 240. I measured the inrush amps on one leg with my clamp meter and it went to 42A. A couple of questions 1- Since each leg is 120, is that 42A on 240V or 21A on 240V? 2- Is there a way to...

Thanks for the replies. It sounds promising for sure! I was not aware that it was the same as a boomer. I searched on here and saw a few TC45/TC40 or around there had bad casings , either engine or axle IIRC) that were cracking. Hopefully someone knows more, I cannot find the thread on it. Does...

I searched but not much came up on these. This has recently come on my radar. Are they good tractors? Reliable? Any big problems? Spec wise, this appears like it would be a good fit for my needs TractorData.com CaseIH Farmall DX55 tractor information TIA.

Tractor is a L2600DT. Fluid is good but the 3PH won't raise. I have removed the tranny cover and inspected the control valve. When the valve is removed, I can blow compressed air into one of the ports and it does raise the lift arms while on the bench. But when I do this with the control valve...

I need some blades for my Befco flail mower. I know there are a few different styles depending on the cut that you want. But does the brand or size matter? I mean, so long as the bolt can go in the hole, does anything else matter? These seem to be all over the place too in terms of price.

I have an older BEFCO H25 flail. The sprig that connects to the tensioner popped of, which caused the belt to jam. I now need a new belt. Coupe of questions- 1) Does anyone have a user/service manual for this? 2) Does someone know what size belt is needed? 3) Is there a pic that details how to...

Had a tire casualty this morning. Popped off the rim after I ran over a cedar stump. :( Once removed, I see that I have a pretty nice slash in it, too big to patch, so I am in need of some ag tires. Manual says 7x16, which appear harder to find than I thought. Any suggestions where to get 1 or 2...

Just got a Kubota 2500 and picked up a middle buster today. But it doesnt look like I have any pins for my lower link on my hitch. I tried to find a parts diagram, but havent yet. So 1) what size pins do I need for my lower link and 2) where can I get a parts diagram/manual? I have the...

I live in Central Texas and has lots of rocks underneath my ground. Taking a shovel will not get you very far. What implement should I use to clear the rock as well as turnover the dirt? Will I need a tiller, plow, rake or ??? I know I will need to manually clear them once they are up on the...

I went to look at a low hours (187) L2500 Kubota today. While I was driving it around , I heard a loud pop. Turns out the oil cap blew off. The owner and I checked the breather tube and there were not any blockages. I then drove it for another 5 minutes. It did not blow off, but I did remove...

Hi, I am seeing numerous B7100 (some HST) that say the HP is 20. But according to tractordata, it's 16. Is there a 20HP b7100 out there? Or are these sellers just misinformed?

I am not sure where this goes, so please move as necessary. Would a tractor make a good fork lift? Does a PTO have more lift capacity than putting some tongs on a FEL? I am actively looking for a tractor, but need a forklift too, something that can lift 1500-2500 pounds. Thanks.

Looking to hear people's opinions on Lamar trailers. I cant find much on these.

I have been doing a lot of searching here, but decided I would post this and get some experts opinions. I purchased 5.5 acres recently. About 1-1.5 is grass that I need to mow regularly. About 2-2.5 acres acres wooded/tree'd and the rest is more field like. This has a semi-gradual grade to it...