mrutkaus
Platinum Member
- Joined
- Feb 1, 2004
- Messages
- 990
- Location
- 15 mi. N. of Winchester VA
- Tractor
- Kioti CK30HST, Kubota BX-1500,
570 hrs, runs fine, just that temp guage needle never moves more than about 1/8" up from cold even when run hard.
Needle does fall back when ignition is turned off, so that part works.
Where should the temp be? Thinking about changing thermostat.
Needle does fall back when ignition is turned off, so that part works.
Where should the temp be? Thinking about changing thermostat.