Great then I would bolt that in between the two blocks , that would allow me to tie in the front loader . Does the block allow for additional implements to be tied in as well?Interesting...that makes sense, I've just never seen it before. The power beyond block I make for the draft control models should fit between the priority valve and relief valve.
View attachment 865719
Much appreciated. LookingYou can tie in as many open center valves as you want, provided they are all in series. So the oil flows out of the adapter block and must flow back into it in one circuit.
I need to machine some more of them so it may be a few weeks, but I'll let you know.
Will your adapter work to add more values to a TC tractor that has one factory valve?You can tie in as many open center valves as you want, provided they are all in series. So the oil flows out of the adapter block and must flow back into it in one circuit.
I need to machine some more of them so it may be a few weeks, but I'll let you know.
I make a rear remote kit for the 20 series tractors, and the TC45 looks similar. But you can still get the full kit from NH for adding a second valve to your tractor. PN 84171957.Will your adapter work to add more values to a TC tractor that has one factory valve?
Do you still have these for sale in need of one for my 1900$150 shipped. It includes all the fittings, orings, and hardware to mount. I made up 3 of them so have 2 left on the shelf. Send me a PM if you're interested.