Page 2 of 6 FirstFirst 12345 ... LastLast
Results 11 to 20 of 56
  1. #11
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Good morning all,

    We just listed the quick tach brackets (with the pins/springs/handles etc) for $179 with free shipping here: Quick Tach Conversion kit | Acessories and other attachments | palletforks.com

    We should have a fully boxed in version soon with a price point around $295.


    Quote Originally Posted by Jnasystems View Post
    I would also be interested in just the latches as I would like to build an SSQA for my mini excavator.
    I don't think a back plate is needed as that would increase the cost and is something that someone with the ability to cut and weld steel should be able to do if he needs to, but really it is up to you as to how much fabrication you would like to leave up to the customer. The price point you have targeted is certainly attractive now, but every add on makes it more expensive and some may not want them in the first place - me.
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  2. #12
    Elite Member Zebrafive's Avatar
    Join Date
    Aug 2010
    Posts
    3,040
    Location
    South West MI
    Tractor
    John Deere 2030, John Deere 6415

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by TitanSkidsteer View Post
    Good morning all,

    We just listed the quick tach brackets (with the pins/springs/handles etc) for $179 with free shipping here: Quick Tach Conversion kit | Acessories and other attachments | palletforks.com

    We should have a fully boxed in version soon with a price point around $295.
    I will be buying a set! Thanks for offering just the latches.

    Any rating, in how much weight they will handle (implement plus implement's load)?
    John Deere 2030 JD 245SL Loader
    John Deere 6415 mfwd JD 640SL Loader

  3. #13
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    We dont have a rating on it yet. These are OEM quality/spec but the capacity will depend greatly on how and what you weld to the plates/latches.


    Quote Originally Posted by Zebrafive View Post
    I will be buying a set! Thanks for offering just the latches.

    Any rating, in how much weight they will handle (implement plus implement's load)?
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  4. #14
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Here are 3 actual photos of the quick tach plates($179). The last 3 photos will be the boxed in version($295) (minus the Deere Style tabs).
    -qtk1-jpg-qtk2-jpg-qtk3-jpg-1dqt-jpg-2dqt-jpg-3dqt-jpg
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  5. #15
    Elite Member Zebrafive's Avatar
    Join Date
    Aug 2010
    Posts
    3,040
    Location
    South West MI
    Tractor
    John Deere 2030, John Deere 6415

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by TitanSkidsteer View Post
    Here are 3 actual photos of the quick tach plates($179). The last 3 photos will be the boxed in version($295) (minus the Deere Style tabs).
    -qtk1-jpg-qtk2-jpg-qtk3-jpg-1dqt-jpg-2dqt-jpg-3dqt-jpg
    Will the boxed set have the square tubing connecting them? Dimentions of the plate the JD mounts are on? Length x width x thickness.
    How heavy (thickness or ga) is the metal of the latch plates?
    John Deere 2030 JD 245SL Loader
    John Deere 6415 mfwd JD 640SL Loader

  6. #16
    Platinum Member
    Join Date
    Jan 2006
    Posts
    963
    Location
    West Central Idaho
    Tractor
    Kubota L5740HSTC3; B3000HSDCC

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Bill,

    Tagging onto the above question (for use on a kubota B3000/LA403 FEL), does the planned (hopefully) inclusion of the cross-tube seen to strengthen against bending, or torsion. (The reason for the question is that for a given wall thickness, round tubing is stronger against torsion forces.) Just thinking out loud.

  7. #17
    Platinum Member
    Join Date
    Oct 2010
    Posts
    541
    Location
    WI
    Tractor
    '13 Yanmar Lx4100

    Default Re: Quick Attach Conversion Kit.... Need a little help

    The square tube should be more than adequate for what that piece is doing. All its there for is to hold both pin boxes together when the bucket or attachment isnt in place. After the attahment is connected the attachment itself should become the stressed member. The bar may see small forces but will be limited to only small amounts of movement. This also raises another point, dont be lifting stuff with only the quick attach mounting, people here have done it and bent that cross beam, its not made for supporting loads!

  8. #18
    Bronze Member
    Join Date
    Sep 2007
    Posts
    67
    Location
    Indiana
    Tractor
    Kubota L3940HST, Kubota 7510HST (traded)

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Looks great. I might suggest making the levers longer sometimes mine are hard to close.

  9. #19
    Advertiser TitanSkidsteer's Avatar
    Join Date
    Nov 2011
    Posts
    112
    Location
    Memphis, TN

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Quote Originally Posted by Zebrafive View Post
    Will the boxed set have the square tubing connecting them? Dimensions of the plate the JD mounts are on? Length x width x thickness.
    How heavy (thickness or ga) is the metal of the latch plates?
    The latch plates on the Boxed assembly are 1/4" thick The gussets and boxes are 5/16". The tube wall is 1/4". It has a sturdy, solid feel.

    The top (or back side plates) are 22" tall and 7" wide. (These will be wider when we get this item into full production)

    The boxed in assembly weight is 137 lbs. An OEM kubota quick tach is 106 lbs.

    We have a few of the boxed in quick tach assemblies here: Quick Tach Conversion Assembly | Acessories and other attachments | palletforks.com

    And just the latch plates here: Quick Tach Conversion kit | Acessories and other attachments | palletforks.com
    Visit us at PalletForks.com or call (800) 605-8241 for your pallet forks, grapple buckets, grapples rakes, clamp-on forks and more!


  10. #20
    Platinum Member
    Join Date
    Jan 2006
    Posts
    963
    Location
    West Central Idaho
    Tractor
    Kubota L5740HSTC3; B3000HSDCC

    Default Re: Quick Attach Conversion Kit.... Need a little help

    Am I correct in understanding that this will be "plug n' play"? In other words, pull the pins from a (for example kubota LA403) pinned bucket and then pin this onto the FEL?

Page 2 of 6 FirstFirst 12345 ... LastLast

Similar Threads

  1. Quick attach conversion
    By jacobsdaddy06 in forum Buying/Pricing/Comparisons
    Replies: 1
    Last Post: 07-01-2012, 09:16 AM
  2. Quick attach conversion
    By ENG18LT in forum Hydraulics
    Replies: 2
    Last Post: 03-02-2012, 12:45 AM
  3. JD FEL quick attach conversion to Bob Cat
    By MD3 in forum Customization
    Replies: 6
    Last Post: 08-14-2010, 01:19 PM
  4. TC35 FEL quick attach conversion??
    By navyjoe in forum New Holland Owning/Operating
    Replies: 9
    Last Post: 07-12-2007, 11:33 AM
  5. FEL bucket conversion to a Quick Attach???
    By Bob_Skurka in forum New Holland Owning/Operating
    Replies: 8
    Last Post: 09-27-2004, 03:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.