OK I'm cheap .
I used up a 5gal bucket of Hydraulic fluid and waited till I had problems before I bought a new one.The front loader and three point were slow then the steering started to get hard .I put the Jinma 254 away and got some fluid and filled it up .Now I have no pressure.I checked the filter ,it looks OK.I cracked the intake to the pump and there seems to be fluid there.
I cracked a fitting on the distribution block, fluid is dribbling out there and every 20 seconds there is a pulse, but not enough to power anything.
There is the correct amount of oil in the crankcase (Jerry from Affordable Tractor suggested the front seal in the pump might have popped and pushed fluid there).
Its got to be air locked right?
Help
I used up a 5gal bucket of Hydraulic fluid and waited till I had problems before I bought a new one.The front loader and three point were slow then the steering started to get hard .I put the Jinma 254 away and got some fluid and filled it up .Now I have no pressure.I checked the filter ,it looks OK.I cracked the intake to the pump and there seems to be fluid there.
I cracked a fitting on the distribution block, fluid is dribbling out there and every 20 seconds there is a pulse, but not enough to power anything.
There is the correct amount of oil in the crankcase (Jerry from Affordable Tractor suggested the front seal in the pump might have popped and pushed fluid there).
Its got to be air locked right?
Help